Archive for September 2nd, 2017

Oil Separator In Refrigeration System Anuniverse 22

Saturday, September 2nd, 2017

Radium Engineering EVO X Crankcase Catch Can Air Oil Separator 20-0106-08

Saturday, September 2nd, 2017
Radium Engineering EVO X Crankcase Catch Can Air Oil Separator 20-0106-08

Radium Engineering EVO X Crankcase Catch Can Air Oil Separator 20-0106-08

Radium Engineering EVO X Crankcase Catch Can Air Oil Separator 20-0106-08

Radium Engineering EVO X Crankcase Catch Can Air Oil Separator 20-0106-08

Radium Engineering EVO X Crankcase Catch Can Air Oil Separator 20-0106-08

The Crankcase Catch Can Kit (shown below) installs immediately behind the LH headlight and plumbs in-line with the crankcase vent hose. This is the hose that connects from the port on the valve cover to the turbo air intake pipe. On 2010+ EVO X models which use the “plastic” valve cover, the hose is 1/2 (13mm) and requires P/N 20-0106-10. During low engine loads, this hose experiences atmospheric pressure, but when the engine is at high load (WOT), this hose will experience vacuum and would normally be drawing unwanted crankcase vapors, unspent fuel, and oil sludge into the air filter intake pipe, turbocharger compressor, etc. Effectively raises the octane and increased engine performance from cleaner inlet air. They do NOT vent to atmosphere (VTA), thus are emissions and track legal. Prevents oil buildup in the intake or intercooler system walls, throttle body, intake manifold, etc. Excessive oil collection can be an indicator of a damaged engine. Capacity: 6 fluid ounces. Height (without fittings): 5 inches. Outside Diameter: 2.45 inches. An oil catch can is essential on a performance vehicle to protect the engine from elevated levels of crankcase blow-by accumulated from aggressive driving. Excess oil saturated air circulating back into the air intake stream can lead to degraded performance. Unlike many catch cans on the market, this catch can features an integrated oil separator that accelerates oil condensation. This cleans the PCV gasses and reduces the oil build-up on the inside of the intake tract and intake manifold and intercooler. The stainless steel filtration media is cleanable and reuseable. The catch cans act as a filter and collect the oil and other sludge and keep it out of vital engine components. The item “Radium Engineering EVO X Crankcase Catch Can Air Oil Separator 20-0106-08″ is in sale since Thursday, October 02, 2014. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Air Intake Systems”. The seller is “built_not_bought_automotive” and is located in Chesapeake, Virginia. This item can be shipped worldwide.
  • Manufacturer Part Number: 20-0106-08
  • Interchange Part Number: AOS
  • Other Part Number: Catch Can
  • Placement on Vehicle: Front
  • Surface Finish: Black
  • Warranty: Unspecified Length
  • Brand: Radium Engineering