Crawford Air Oil Separator 02-07 Subaru WRX/STi TMIC

Wednesday, July 19th, 2017
Crawford Air Oil Separator 02-07 Subaru WRX/STi TMIC

Crawford Air Oil Separator 02-07 Subaru WRX/STi TMIC

This listing is for the newer, black version! Drawing on their 35 years of racing knowledge, the Crawford Performance Closed Loop Air/Oil Separator was engineered and designed to keep motor oil where it belongs inside the motor and out of the intake system. In the stock configuration, the crankcase is vented to the intake system in three different places. Each of these vents have a baffle system built within the motor to minimize the transfer of oil to the intake, but some oil can still make its way into the combustion chambers. When the oil enters the combustion chambers, it effectively lowers the octane of the fuel, leading to detonation. Crawford’s Air/Oil Separator effectively removes the oil from the air coming out of the engines ventilation system via a two stage process. The first step in the process is a large volumetric swirl pot. The function of the swirl pot is to use centrifugal force to remove the oil from the air. The air is then passed through a second chamber (see second step below), and extracted through the top of the AOS. Gravity then sends the remaining oil down the walls of the swirl pot and collects in the bottom of the AOS. The second step involves a second chamber located within the first chamber. As the separated air moves up inside the AOS, it must enter the second chamber before it can vent out the top of the AOS. The function of the secondary chamber is to remove any residual oil that may have made its way up the swirl pot. The secondary chamber also has a drain to return any separated oil back to the engine. Crawford’s Version 2 AOS also incorporates an internal heater to keep the AOS operating at the proper temperature. The coolant line that runs from the turbo to the engine is now re-routed through the AOS. The effectively equalizes the temperature between the AOS and the engine to avoid condensation which can occur within any AOS. This heater also makes sure the vaporized water leaving the motor makes its way through the AOS in vapor form, rather than condensing back into a liquid. This is a MUST in cold weather and a bonus for any climate. NO OTHER AOS ON THE MARKET EMPLOYS THIS TECHNOLOGY! Crawford Part Number — S0714-1. All orders placed over the weekend will begin being processed on the following Monday. We do welcome international orders, but we do require that all international orders are processed through Pay-Pal. We cannot guarantee any of our parts will fit non-US cars unless explicitly stated. We will not violate any international laws and declare any items less than their actual value, as a gift, or for testing purposes, etc. The item “Crawford Air Oil Separator 02-07 Subaru WRX/STi TMIC” is in sale since Saturday, July 01, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Engines & Components\Other”. The seller is “fast-imports” and is located in Boulder, Colorado. This item can be shipped worldwide.
  • Brand: Crawford
  • Manufacturer Part Number: S0714-1

Crawford Air Oil Separator AOS Kit TMIC 02-07 WRX / STI S0714B

Saturday, July 15th, 2017
Crawford Air Oil Separator AOS Kit TMIC 02-07 WRX / STI S0714B

In the stock configuration, the crankcase is vented to the intake system in three different places. Each of these vents have a baffle system built within the motor to minimize the transfer of oil to the intake, but some oil can still make its way into the combustion chambers. When the oil enters the combustion chambers, it effectively lowers the octane of the fuel, leading to detonation. Our Air/Oil Separator effectively removes the oil from the air coming out of the engines ventilation system via a two stage process: The first step in the process is a large volumetric swirl pot. The function of the swirl pot is to use centrifugal force to remove the oil from the air. The air is then passed through a second chamber (see second step below), and extracted through the top of the AOS. Gravity then sends the remaining oil down the walls of the swirl pot and collects in the bottom of the AOS. The second step involves a second chamber located within the first chamber. As the separated air moves up inside the AOS, it must enter the second chamber before it can vent out the top of the AOS. The function of the secondary chamber is to remove any residual oil that may have made its way up the swirl pot. The secondary chamber also has a drain to return any separated oil back to the engine. Our Version 2 AOS incorporates an internal heater to keep the AOS operating at the proper temperature. The coolant line that runs from the turbo to the engine is now re-routed through the AOS. The effectively equalizes the temperature between the AOS and the engine to avoid condensation which can occur within any AOS. This heater also makes sure the vaporized water leaving the motor makes its way through the AOS in vapor form, rather than condensing back into a liquid. This is a MUST in cold weather and a bonus for any climate. NO OTHER AOS ON THE MARKET EMPLOYS THIS TECHNOLOGY! Special orders from MFGs can take longer depending on MFG, availability, etc. Customer Service Your complete shopping satisfaction is our #1 priority. Please DO NOT return item(s) to us without prior return authorization. The item “Crawford Air Oil Separator AOS Kit TMIC 02-07 WRX / STI S0714B” is in sale since Friday, June 30, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Engines & Components\Other”. The seller is “sakarimotorsports” and is located in Duluth, Georgia. This item can be shipped to United States.
  • Brand: Crawford
  • Manufacturer Part Number: S0714B

Perrin Air/Oil Separator for 02-07 WRX/STI With TMIC Black PSP-ENG-605BK

Saturday, July 15th, 2017
Perrin Air/Oil Separator for 02-07 WRX/STI With TMIC Black PSP-ENG-605BK

Perrin Air/Oil Separator for 02-07 WRX/STI With TMIC Black PSP-ENG-605BK

The PERRIN Performance Air Oil Separator traps oil from the crank case vents before it enters the intake, thus increasing intercooler efficiency and reduces chances of performance-robbing detonation. The AOS increases intercooler efficiency by reducing the amount of oil deposited into your intercooler and intake system! As blow-by/oil builds up inside your intercooler, the less efficient it becomes due to less heat being transferred away from your engine. This leads to power loss and detonation, which can be damaging to your engine. Reduce carbon build up in the combustion chamber, intake valves, and in your intake tract. Crank case blow-by is recirculated back to the intake to be ingested by the engine, but in doing so, gets stuck in the intake tract, intake valves, and the intercooler. This builds up over time which causes a loss in power and extra wear and tear on your valve train. The octane level of oil is very low. Anytime there is a significant amount of engine blow-by (oil) being put back into your engine, it reduces your fuel’s octane level leading to detonation or knock, which will cause loss of power and engine failure. We designed the PERRIN Air Oil Separator kit based on the idea that using a PCV on the AOS outlet ensures proper crank case venting during light loads and helps reduce unwanted blow-by gases into your intake system. Incorporating a PCV reduces the smell from exhaust and keeps your intake tract clean. Easy Disassembly For Cleaning. Over the years, a slight buildup may occur inside your AOS. This can be quickly taken care of by removing one bolt to access the inside for cleaning. This small feature is one of the many things that makes the PERRIN AOS stand out from the rest. The base plate of the the AOS is heated by coolant drawn from the engine. By keeping the AOS the same temperature as the engine and blow-by gases, water condensation is decreased allowing oil and water vapor to separate and pass through the can. This vital feature eliminates nearly all the sludge that can build up in the AOS body, which drastically reduce how often you must clean it. Powder coated for protection against the elements, the textured finish will look awesome for years to come. The PERRIN AOS is available in black or red texture powder coating. PERRIN PART NUMBER – PSP-ENG-605BK. All orders placed over the weekend will begin being processed on the following Monday. We do welcome international orders, but we do require that all international orders are processed through Pay-Pal. We will not violate any international laws and declare any items less than their actual value, as a gift, or for testing purposes, etc. The item “Perrin Air/Oil Separator for 02-07 WRX/STI With TMIC Black PSP-ENG-605BK” is in sale since Friday, June 30, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Engines & Components\Other”. The seller is “fast-imports” and is located in Boulder, Colorado. This item can be shipped worldwide.
  • Brand: PERRIN
  • Manufacturer Part Number: PSP-ENG-605BK

Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Black Wrinkle)

Sunday, July 9th, 2017
Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Black Wrinkle)

Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Black Wrinkle)

Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Black Wrinkle)

Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Black Wrinkle)

Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Black Wrinkle)

Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Black Wrinkle)

Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Black Wrinkle)

Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Black Wrinkle)

Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Black Wrinkle)

Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Black Wrinkle)

PERRIN PERFORMANCE – AIR OIL SEPARATOR. WRX / STI 2002 -2007 WITH TMIC. The PERRIN Performance Air Oil Separator traps oil from the crank case vents before it enters the intake, thus increasing intercooler efficiency and reduces chances of performance-robbing detonation. Featuring swirl pot type technology and multi-layer baffles, the PERRIN Performance Air Oil Separator forces incoming air to circulate across the baffles, separating oil from engine blowby. The AOS increases intercooler efficiency by reducing the amount of oil deposited into your intercooler and intake system! As blow-by/oil builds up inside your intercooler, the less efficient it becomes due to less heat being transferred away from your engine. This leads to power loss and detonation, which can be damaging to your engine. Reduce carbon build up in the combustion chamber, intake valves, and in your intake tract. Crank case blow-by is recirculated back to the intake to be ingested by the engine, but in doing so, gets stuck in the intake tract, intake valves, and the intercooler. This builds up over time which causes a loss in power and extra wear and tear on your valve train. The octane level of oil is very low. Anytime there is a significant amount of engine blow-by (oil) being put back into your engine, it reduces your fuel’s octane level leading to detonation or knock, which will cause loss of power and engine failure. We designed the PERRIN Air Oil Separator kit based on the idea that using a PCV on the AOS outlet ensures proper crank case venting during light loads and helps reduce unwanted blow-by gases into your intake system. Incorporating a PCV reduces the smell from exhaust and keeps your intake tract clean. Easy Disassembly For Cleaning. Over the years, a slight buildup may occur inside your AOS. This can be quickly taken care of by removing one bolt to access the inside for cleaning. This small feature is one of the many things that makes the PERRIN AOS stand out from the rest. This is not a catch can! The PERRIN Air Oil Separator is not a catch can. Catch cans capture and water and oil vapor filling with a sticky oily mess requiring it to be emptied. The PERRIN AOS separates engine oil from water vapor and allows it to drain back into the engine. Oil entering from the crankcase vents spins counter clockwise through the entire body of the AOS, passing along four walls equaling roughly 50.25 sq/in of surface area. The multiple baffle walls in our compact design simulate the surface area of an AOS that is 13.5 tall! As oil accumulates on all the walls, gravity pulls it to the bottom of the can where it drains back to the engine block while water vapor and air merge with the intake air and are reburied in the engine. This means no maintenance or upkeep. The base plate of the the AOS is heated by coolant drawn from the engine. By keeping the AOS the same temperature as the engine and blow-by gases, water condensation is decreased allowing oil and water vapor to separate and pass through the can. This vital feature eliminates nearly all the sludge that can build up in the AOS body, which drastically reduce how often you must clean it. Custom Drain Back Fitting. Instead of using a universal type fitting, we have designed a purpose built crank case fitting that does the job perfectly. Like the AOS body, the drain fitting is threaded to except virtually any kind of fitting to allow for easy customization on special projects. Application Specific Mounting Brackets. Each kit comes with specific mounting brackets and instructions to install your AOS perfectly in your engine bay or adapt our simple 2 hole mounting bracket for custom installations. Every connection on the PERRIN AOS is threaded NPT which is a very universal way to connect fittings. This allows for totally customizable setups and installations to be done, to best match your setup. The item “Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Black Wrinkle)” is in sale since Friday, November 15, 2013. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Air Intake Systems”. The seller is “streetrays” and is located in Pflugerville, Texas. This item can be shipped to United States.
  • Manufacturer Part Number: PSP-ENG-605BK (Top Mount Intercooler Only)
  • Warranty: Yes
  • Part Brand: Perrin Performance

Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Red Wrinkle)

Thursday, July 6th, 2017
Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Red Wrinkle)

Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Red Wrinkle)

Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Red Wrinkle)

Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Red Wrinkle)

Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Red Wrinkle)

Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Red Wrinkle)

Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Red Wrinkle)

Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Red Wrinkle)

Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Red Wrinkle)

Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Red Wrinkle)

PERRIN PERFORMANCE – AIR OIL SEPARATOR. WRX / STI 2002 -2007 WITH TMIC ONLY. PART # PSP-ENG-605RD (RED). The PERRIN Performance Air Oil Separator traps oil from the crank case vents before it enters the intake, thus increasing intercooler efficiency and reduces chances of performance-robbing detonation. Featuring swirl pot type technology and multi-layer baffles, the PERRIN Performance Air Oil Separator forces incoming air to circulate across the baffles, separating oil from engine blowby. The AOS increases intercooler efficiency by reducing the amount of oil deposited into your intercooler and intake system! As blow-by/oil builds up inside your intercooler, the less efficient it becomes due to less heat being transferred away from your engine. This leads to power loss and detonation, which can be damaging to your engine. Reduce carbon build up in the combustion chamber, intake valves, and in your intake tract. Crank case blow-by is recirculated back to the intake to be ingested by the engine, but in doing so, gets stuck in the intake tract, intake valves, and the intercooler. This builds up over time which causes a loss in power and extra wear and tear on your valve train. The octane level of oil is very low. Anytime there is a significant amount of engine blow-by (oil) being put back into your engine, it reduces your fuel’s octane level leading to detonation or knock, which will cause loss of power and engine failure. We designed the PERRIN Air Oil Separator kit based on the idea that using a PCV on the AOS outlet ensures proper crank case venting during light loads and helps reduce unwanted blow-by gases into your intake system. Incorporating a PCV reduces the smell from exhaust and keeps your intake tract clean. Easy Disassembly For Cleaning. Over the years, a slight buildup may occur inside your AOS. This can be quickly taken care of by removing one bolt to access the inside for cleaning. This small feature is one of the many things that makes the PERRIN AOS stand out from the rest. This is not a catch can! The PERRIN Air Oil Separator is not a catch can. Catch cans capture and water and oil vapor filling with a sticky oily mess requiring it to be emptied. The PERRIN AOS separates engine oil from water vapor and allows it to drain back into the engine. Oil entering from the crankcase vents spins counter clockwise through the entire body of the AOS, passing along four walls equaling roughly 50.25 sq/in of surface area. The multiple baffle walls in our compact design simulate the surface area of an AOS that is 13.5 tall! As oil accumulates on all the walls, gravity pulls it to the bottom of the can where it drains back to the engine block while water vapor and air merge with the intake air and are reburied in the engine. This means no maintenance or upkeep. The base plate of the the AOS is heated by coolant drawn from the engine. By keeping the AOS the same temperature as the engine and blow-by gases, water condensation is decreased allowing oil and water vapor to separate and pass through the can. This vital feature eliminates nearly all the sludge that can build up in the AOS body, which drastically reduce how often you must clean it. Custom Drain Back Fitting. Instead of using a universal type fitting, we have designed a purpose built crank case fitting that does the job perfectly. Like the AOS body, the drain fitting is threaded to except virtually any kind of fitting to allow for easy customization on special projects. Application Specific Mounting Brackets. Each kit comes with specific mounting brackets and instructions to install your AOS perfectly in your engine bay or adapt our simple 2 hole mounting bracket for custom installations. Every connection on the PERRIN AOS is threaded NPT which is a very universal way to connect fittings. This allows for totally customizable setups and installations to be done, to best match your setup. The item “Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Red Wrinkle)” is in sale since Friday, November 15, 2013. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Air Intake Systems”. The seller is “streetrays” and is located in Pflugerville, Texas. This item can be shipped to United States.
  • Manufacturer Part Number: PSP-ENG-605RD (Top Mount Intercooler Only)
  • Warranty: Yes
  • Part Brand: Perrin Performance

GrimmSpeed Blue Air Oil Separator for 02-07 Subaru WRX / 04+ STI / 04-08 FXT

Monday, June 26th, 2017
GrimmSpeed Blue Air Oil Separator for 02-07 Subaru WRX / 04+ STI / 04-08 FXT

GrimmSpeed Blue Air Oil Separator for 02-07 Subaru WRX / 04+ STI / 04-08 FXT

The GrimmSpeed Subaru Air/Oil Separator has a unique patent pending design that allows you to maintain your PCV Valve while separating the oil out of the crankcase and head ventilation air! Our AOS will allow your engine to run more efficiently due to the separation of oil from the intake system. When there is oil in your system, the result is 1 reduced fuel octane 2 higher chance of engine knock(detonation) 3 worse emissions 4 higher oil consumption. Our Subaru Air/Oil Separator will help all of these problems. In typical GrimmSpeed fashion, we have made a very compact unit that packs a powerful punch(and looks good while doing it)! No more having to check/empty your catch can and refilling your oil. The GrimmSpeed AOS coalesces oil without using a mesh media. Mesh medias can cause contaminates to collect and build up resulting in possible sludge. Our AOS is self maintained so you can just sit back, stop worrying, and enjoy driving your car! Special orders from MFGs can take longer depending on MFG, availability, etc. Customer Service Your complete shopping satisfaction is our #1 priority. Please DO NOT return item(s) to us without prior return authorization. The item “GrimmSpeed Blue Air Oil Separator for 02-07 Subaru WRX / 04+ STI / 04-08 FXT” is in sale since Monday, June 26, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Engines & Components\Other”. The seller is “sakarimotorsports” and is located in Duluth, Georgia. This item can be shipped to United States.
  • Brand: GrimmSpeed
  • Manufacturer Part Number: 078006B

GrimmSpeed Black Air Oil Separator for 02-07 WRX / 04+ STI / 04-08 FXT 078006

Wednesday, June 21st, 2017
GrimmSpeed Black Air Oil Separator for 02-07 WRX / 04+ STI / 04-08 FXT 078006

GrimmSpeed Black Air Oil Separator for 02-07 WRX / 04+ STI / 04-08 FXT 078006

GrimmSpeed Black Air Oil Separator for 02-07 WRX / 04+ STI / 04-08 FXT 078006

The GrimmSpeed Subaru Air/Oil Separator has a unique patent pending design that allows you to maintain your PCV Valve while separating the oil out of the crankcase and head ventilation air! Our AOS will allow your engine to run more efficiently due to the separation of oil from the intake system. When there is oil in your system, the result is 1 reduced fuel octane 2 higher chance of engine knock(detonation) 3 worse emissions 4 higher oil consumption. Our Subaru Air/Oil Separator will help all of these problems. In typical GrimmSpeed fashion, we have made a very compact unit that packs a powerful punch(and looks good while doing it)! No more having to check/empty your catch can and refilling your oil. The GrimmSpeed AOS coalesces oil without using a mesh media. Mesh medias can cause contaminates to collect and build up resulting in possible sludge. Our AOS is self maintained so you can just sit back, stop worrying, and enjoy driving your car! Special orders from MFGs can take longer depending on MFG, availability, etc. Customer Service Your complete shopping satisfaction is our #1 priority. Please DO NOT return item(s) to us without prior return authorization. The item “GrimmSpeed Black Air Oil Separator for 02-07 WRX / 04+ STI / 04-08 FXT 078006″ is in sale since Tuesday, June 20, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Engines & Components\Other”. The seller is “sakarimotorsports” and is located in Duluth, Georgia. This item can be shipped to United States.
  • Brand: GrimmSpeed
  • Manufacturer Part Number: 078006

SALE Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Red Wrinkle)

Tuesday, June 20th, 2017
SALE Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Red Wrinkle)

We have attached photo of the item. THERE WILL BE NO RETURN AUTHORIZATION ALLOWED FOR THIS ITEM. PERRIN PERFORMANCE – AIR OIL SEPARATOR. WRX / STI 2002 -2007 WITH TMIC ONLY. PART # PSP-ENG-605RD (RED). The PERRIN Performance Air Oil Separator traps oil from the crank case vents before it enters the intake, thus increasing intercooler efficiency and reduces chances of performance-robbing detonation. Featuring swirl pot type technology and multi-layer baffles, the PERRIN Performance Air Oil Separator forces incoming air to circulate across the baffles, separating oil from engine blowby. The AOS increases intercooler efficiency by reducing the amount of oil deposited into your intercooler and intake system! As blow-by/oil builds up inside your intercooler, the less efficient it becomes due to less heat being transferred away from your engine. This leads to power loss and detonation, which can be damaging to your engine. Reduce carbon build up in the combustion chamber, intake valves, and in your intake tract. Crank case blow-by is recirculated back to the intake to be ingested by the engine, but in doing so, gets stuck in the intake tract, intake valves, and the intercooler. This builds up over time which causes a loss in power and extra wear and tear on your valve train. The octane level of oil is very low. Anytime there is a significant amount of engine blow-by (oil) being put back into your engine, it reduces your fuel’s octane level leading to detonation or knock, which will cause loss of power and engine failure. We designed the PERRIN Air Oil Separator kit based on the idea that using a PCV on the AOS outlet ensures proper crank case venting during light loads and helps reduce unwanted blow-by gases into your intake system. Incorporating a PCV reduces the smell from exhaust and keeps your intake tract clean. Easy Disassembly For Cleaning. Over the years, a slight buildup may occur inside your AOS. This can be quickly taken care of by removing one bolt to access the inside for cleaning. This small feature is one of the many things that makes the PERRIN AOS stand out from the rest. This is not a catch can! The PERRIN Air Oil Separator is not a catch can. Catch cans capture and water and oil vapor filling with a sticky oily mess requiring it to be emptied. The PERRIN AOS separates engine oil from water vapor and allows it to drain back into the engine. Oil entering from the crankcase vents spins counter clockwise through the entire body of the AOS, passing along four walls equaling roughly 50.25 sq/in of surface area. The multiple baffle walls in our compact design simulate the surface area of an AOS that is 13.5 tall! As oil accumulates on all the walls, gravity pulls it to the bottom of the can where it drains back to the engine block while water vapor and air merge with the intake air and are reburied in the engine. This means no maintenance or upkeep. The base plate of the the AOS is heated by coolant drawn from the engine. By keeping the AOS the same temperature as the engine and blow-by gases, water condensation is decreased allowing oil and water vapor to separate and pass through the can. This vital feature eliminates nearly all the sludge that can build up in the AOS body, which drastically reduce how often you must clean it. Custom Drain Back Fitting. Instead of using a universal type fitting, we have designed a purpose built crank case fitting that does the job perfectly. Like the AOS body, the drain fitting is threaded to except virtually any kind of fitting to allow for easy customization on special projects. Application Specific Mounting Brackets. Each kit comes with specific mounting brackets and instructions to install your AOS perfectly in your engine bay or adapt our simple 2 hole mounting bracket for custom installations. Every connection on the PERRIN AOS is threaded NPT which is a very universal way to connect fittings. This allows for totally customizable setups and installations to be done, to best match your setup. The item “SALE Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Red Wrinkle)” is in sale since Monday, June 19, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Air Intake Systems”. The seller is “streetrays” and is located in Pflugerville, Texas. This item can be shipped to United States.
  • Manufacturer Part Number: PSP-ENG-605RD (Top Mount Intercooler Only)
  • Part Brand: Perrin Performance
  • Brand: Perrin Performance

GrimmSpeed 02-07 WRX / 04-10+ STi BLACK Air Oil Separator

Monday, June 19th, 2017
GrimmSpeed 02-07 WRX / 04-10+ STi BLACK Air Oil Separator

GrimmSpeed 02-07 WRX / 04-10+ STi BLACK Air Oil Separator

GrimmSpeed 02-07 WRX / 04-10+ STi BLACK Air Oil Separator

GrimmSpeed 02-07 WRX / 04-10+ STi BLACK Air Oil Separator

GrimmSpeed 02-07 WRX / 04-10+ STi BLACK Air Oil Separator. GrimmSpeed Air/Oil Seperator: An Air/Oil Separator has one job, remove the oil from the engine ventilation system so the oil does not get sent through the intake system. The GrimmSpeed Subaru Air/Oil Separator has a unique patent pending design that allows you to maintain your PCV Valve while separating the oil out of the crankcase and head ventilation air! Our AOS will allow your engine to run more efficiently due to the separation of oil from the intake system. When there is oil in your system, the result is 1 reduced fuel octane 2 higher chance of engine knock(detonation) 3 worse emissions 4 higher oil consumption. Our Subaru Air/Oil Separator will help all of these problems. In typical GrimmSpeed fashion, we have made a very compact unit that packs a powerful punch(and looks good while doing it)! No more having to check/empty your catch can and refilling your oil. The GrimmSpeed AOS coalesces oil without using a mesh media. Mesh medias can cause contaminates to collect and build up resulting in possible sludge. Our AOS is self maintained so you can just sit back, stop worrying, and enjoy driving your car! WRX;WRX LIMITED;WRX TR. 2.0;2.5. SPORTS 2.5 XT. WRX STI;WRX STI LIMITED;WRX STI SPECIAL EDITION. Orders placed after 3PM on Friday might not be processed until the following Monday. Please note that UPS does not deliver on Saturday or Sunday. Next day orders placed on Friday before 3PM will be delivered on Monday not Saturday. The item “GrimmSpeed 02-07 WRX / 04-10+ STi BLACK Air Oil Separator” is in sale since Thursday, June 01, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Engines & Components\Other”. The seller is “valiantsparts” and is located in Savannah, Georgia. This item can be shipped to United States.
  • Brand: GrimmSpeed
  • Manufacturer Part Number: 078006

SALE Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Red Wrinkle)

Friday, June 16th, 2017
SALE Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Red Wrinkle)

We have attached photo of the item. THERE WILL BE NO RETURN AUTHORIZATION ALLOWED FOR THIS ITEM. PERRIN PERFORMANCE – AIR OIL SEPARATOR. WRX / STI 2002 -2007 WITH TMIC ONLY. PART # PSP-ENG-605RD (RED). The PERRIN Performance Air Oil Separator traps oil from the crank case vents before it enters the intake, thus increasing intercooler efficiency and reduces chances of performance-robbing detonation. Featuring swirl pot type technology and multi-layer baffles, the PERRIN Performance Air Oil Separator forces incoming air to circulate across the baffles, separating oil from engine blowby. The AOS increases intercooler efficiency by reducing the amount of oil deposited into your intercooler and intake system! As blow-by/oil builds up inside your intercooler, the less efficient it becomes due to less heat being transferred away from your engine. This leads to power loss and detonation, which can be damaging to your engine. Reduce carbon build up in the combustion chamber, intake valves, and in your intake tract. Crank case blow-by is recirculated back to the intake to be ingested by the engine, but in doing so, gets stuck in the intake tract, intake valves, and the intercooler. This builds up over time which causes a loss in power and extra wear and tear on your valve train. The octane level of oil is very low. Anytime there is a significant amount of engine blow-by (oil) being put back into your engine, it reduces your fuel’s octane level leading to detonation or knock, which will cause loss of power and engine failure. We designed the PERRIN Air Oil Separator kit based on the idea that using a PCV on the AOS outlet ensures proper crank case venting during light loads and helps reduce unwanted blow-by gases into your intake system. Incorporating a PCV reduces the smell from exhaust and keeps your intake tract clean. Easy Disassembly For Cleaning. Over the years, a slight buildup may occur inside your AOS. This can be quickly taken care of by removing one bolt to access the inside for cleaning. This small feature is one of the many things that makes the PERRIN AOS stand out from the rest. This is not a catch can! The PERRIN Air Oil Separator is not a catch can. Catch cans capture and water and oil vapor filling with a sticky oily mess requiring it to be emptied. The PERRIN AOS separates engine oil from water vapor and allows it to drain back into the engine. Oil entering from the crankcase vents spins counter clockwise through the entire body of the AOS, passing along four walls equaling roughly 50.25 sq/in of surface area. The multiple baffle walls in our compact design simulate the surface area of an AOS that is 13.5 tall! As oil accumulates on all the walls, gravity pulls it to the bottom of the can where it drains back to the engine block while water vapor and air merge with the intake air and are reburied in the engine. This means no maintenance or upkeep. The base plate of the the AOS is heated by coolant drawn from the engine. By keeping the AOS the same temperature as the engine and blow-by gases, water condensation is decreased allowing oil and water vapor to separate and pass through the can. This vital feature eliminates nearly all the sludge that can build up in the AOS body, which drastically reduce how often you must clean it. Custom Drain Back Fitting. Instead of using a universal type fitting, we have designed a purpose built crank case fitting that does the job perfectly. Like the AOS body, the drain fitting is threaded to except virtually any kind of fitting to allow for easy customization on special projects. Application Specific Mounting Brackets. Each kit comes with specific mounting brackets and instructions to install your AOS perfectly in your engine bay or adapt our simple 2 hole mounting bracket for custom installations. Every connection on the PERRIN AOS is threaded NPT which is a very universal way to connect fittings. This allows for totally customizable setups and installations to be done, to best match your setup. The item “SALE Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Red Wrinkle)” is in sale since Monday, June 12, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Air Intake Systems”. The seller is “streetrays” and is located in Pflugerville, Texas. This item can be shipped to United States.
  • Manufacturer Part Number: PSP-ENG-605RD (Top Mount Intercooler Only)
  • Part Brand: Perrin Performance
  • Brand: Perrin Performance