Perrin Air Oil Separator (Red) for 2002-2014 WRX / 2002-2017 STi with FMIC

Wednesday, September 20th, 2017
Perrin Air Oil Separator (Red) for 2002-2014 WRX / 2002-2017 STi with FMIC

Perrin Air Oil Separator (Red) for 2002-2014 WRX / 2002-2017 STi with FMIC

Perrin Air Oil Separator (Red) for 2002-2014 WRX / 2002-2017 STi with FMIC

Perrin Air Oil Separator (Red) for 2002-2014 WRX / 2002-2017 STi with FMIC

Perrin Air Oil Separator (Red) for 2002-2014 WRX / 2002-2017 STi with FMIC

Perrin Air Oil Separator (Red) for 2002-2014 WRX / 2002-2017 STi with FMIC

Perrin Air Oil Separator (Red) for 2002-2014 WRX / 2002-2017 STi with FMIC

Perrin Air Oil Separator (Red) for 2002-2014 WRX / 2002-2017 STi with FMIC

Perrin Performance Air Oil Separator (Red) for FMIC. The PERRIN Air Oil Separator traps oil from the crank case vents before it enters the intake, increasing intercooler efficiency, and reduces chances of performance-robbing detonation. INCREASE INTERCOOLER EFFICIENCY The AOS increases intercooler efficiency by reducing the amount of oil deposited into your intercooler and intake system! As blow-by/oil builds up inside your intercooler, the less efficient it becomes due to less heat being transferred away from your engine. This leads to power loss and detonation, which can be damaging to your engine. REDUCE CARBON BUILDUP Reduce carbon build up in the combustion chamber, intake valves, and in your intake tract. Crank case blow-by is recirculated back to the intake to be ingested by the engine, but in doing so, gets stuck in the intake tract, intake valves, and the intercooler. This builds up over time which causes a loss in power and extra wear and tear on your valves. Reduce Detonation The octane level of oil is very low. Anytime there is a significant amount of engine blow-by (oil) being put back into your engine, it reduces your fuel’s octane level leading to detonation or knock, which will cause loss of power and engine failure. PCV System Included We designed the PERRIN Air Oil Separator kit based on the idea that using a PCV on the AOS outlet ensures proper crank case venting during light loads and helps reduce unwanted blow-by gases into your intake system. Incorporating a PCV reduces the smell from exhaust and keeps your intake tract clean. Easy Disassembly For Cleaning Over the years, a slight buildup may occur inside your AOS. This can be quickly taken care of by removing one bolt to access the inside for cleaning. This small feature is one of the many things that makes the PERRIN AOS stand out from the rest. THIS IS NOT A CATCH CAN. The PERRIN Air Oil Separator is not a catch can. Catch cans capture water and oil vapor filling with a sticky mess requiring it to be emptied. The PERRIN AOS separates engine oil from water vapor and allows it to drain back into the engine. Oil entering from the crankcase vents spins counter clockwise through the entire body of the AOS, passing along four walls equaling roughly 50.25 sq/in of surface area. The multiple baffle walls in our compact design simulate the surface area of an AOS that is 13.5 tall! As oil accumulates on all the walls, gravity pulls it to the bottom of the can where it drains back to the engine block while water vapor and air merge with the intake air and are re-burned in the engine. This means little maintenance or upkeep. CUSTOM DRAIN BACK FITTING. Instead of using a universal type fitting, we have designed a purpose built crank case fitting that does the job perfectly. Like the AOS body, the drain fitting is threaded to except virtually any kind of fitting to allow for easy customization on special projects. The base plate of the the AOS is heated by coolant drawn from the engine. By keeping the AOS the same temperature as the engine and blow-by gases, water condensation is decreased allowing oil and water vapor to separate and pass through the can. This vital feature eliminates nearly all the sludge that can build up in the AOS body, which drastically reduce how often you must clean it. Subaru engines have 3 main crank case vents located on each valve cover, and one in the center crank case. The PERRIN AOS is designed to connect to each of these separately without requiring any T connections. This allows for better venting and reduces the chance of oil being ingested during high G corners common issue on flat type or boxer engines. Powder coated for protection against the elements, the textured finish will look awesome for years to come. For Left Hand Drive Vehicle only Do not fit vehicle with TMIC (Top Mount intercooler). Please inspect your order upon receipt. Returning an item without following proper procedures will delay the claim process, and we reserve the right to refuse any unauthorized return packages. In some occasions we might request images as supporting document for damage/ defective claims to help us determine the best and most effective resolution toward the problem. Powered by SixBit’s eCommerce Solution. The item “Perrin Air Oil Separator (Red) for 2002-2014 WRX / 2002-2017 STi with FMIC” is in sale since Wednesday, January 18, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Turbos, Nitrous, Superchargers\Turbo Chargers & Parts”. The seller is “sabersport” and is located in USA. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama.
  • Brand: Perrin Performance
  • Manufacturer Part Number: PSP-ENG-607RD
  • Surface Finish: Textured Poweder Coat
  • Warranty: Yes
  • Country/Region of Manufacture: United States
  • Availability: IN STOCK, SHIP OUT WITHIN ONE BUSINESS DAY
  • UPC: Does Not Apply
  • Note: Not CARB legal: Not for sale or street use in Cali

CP V2 Air/Oil Separator 08-14 WRX05-09 LGT/OXT 07-13 FXT with FMIC & Rot. Turbo

Tuesday, July 18th, 2017
CP V2 Air/Oil Separator 08-14 WRX05-09 LGT/OXT 07-13 FXT with FMIC & Rot. Turbo

CP V2 Air/Oil Separator 08-14 WRX05-09 LGT/OXT 07-13 FXT with FMIC & Rot. Turbo

CP V2 Air/Oil Separator: For use in Subaru 08-14 WRX; 05-09 LGT/OXT; 07-13 FXT w/ FMIC and Rotated Turbo. Not a Catch Can – Closed Loop and Maintenance Free. Reduce Detonation and Risk of Engine Failure. Reduce Fuel Dilution and Subsequent Power Loss. Added Coolant Bypass Line to Avoid Condensation. Can is Heated for Cold Climates and Short Drives. The Crawford Performance Air/Oil Separator (AOS) is the original solution to Subaru’s notorious oiling system issues. Although the technology was pre-existing with other vehicle brands such as Porsche, Crawford Performance is the inventor of the first system specifically for Subaru. No other AOS on the market employs the same technology. How does it work? The built in AOS that comes factory in Subaru Engines is only semi-efficient at stock power levels. Any added power/stress/heat and G-Forces increases the amount of excess oil that ends up in your intake. Due to the fact the oil is heavier than water and you’re dealing with a horizontally-opposed engine, the oil can only end up in one place: coating the tops of your pistons. Since oil is naturally combustible, this causes irregularities with the controlled explosion that happens in this environment, subsequently creating multiple explosions. Another word for this is detonation an engine killer. Stop the oil from ever getting there with the Crawford Air/Oil Separator. Having a secondary system is your fail-safe for detonation that is un-related to a poor tune. You will also consume less oil and help maintain the ultimate mixture in your cylinders to maximaize your power output. This kit includes the can itself, and all necessary hoses and fittings to install. The install does take some mechanical knowledge, so we suggest taking your car in to a professional for installation. That being said, we provide step by step instructions so that enthusiasts can install the kit at home with a few simple tools. Fitment: Designed to fit with Front Mount Intercoolers that are accompanied by a Rotated Turbo. Unit is mounted on the pitch stop. The item “CP V2 Air/Oil Separator 08-14 WRX05-09 LGT/OXT 07-13 FXT with FMIC & Rot. Turbo” is in sale since Wednesday, July 05, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Engines & Components\Other”. The seller is “crawfordperformance” and is located in Oceanside, California. This item can be shipped worldwide.
  • Brand: Crawford Performance
  • Manufacturer Part Number: S0718-1
  • Country/Region of Manufacture: United States

Perrin AOS Air Oil Separator Kit for 02-14 WRX & STI with FMIC (Red Wrinkle)

Friday, July 7th, 2017
Perrin AOS Air Oil Separator Kit for 02-14 WRX & STI with FMIC (Red Wrinkle)

Perrin AOS Air Oil Separator Kit for 02-14 WRX & STI with FMIC (Red Wrinkle)

Perrin AOS Air Oil Separator Kit for 02-14 WRX & STI with FMIC (Red Wrinkle)

Perrin AOS Air Oil Separator Kit for 02-14 WRX & STI with FMIC (Red Wrinkle)

Perrin AOS Air Oil Separator Kit for 02-14 WRX & STI with FMIC (Red Wrinkle)

Perrin AOS Air Oil Separator Kit for 02-14 WRX & STI with FMIC (Red Wrinkle)

Perrin AOS Air Oil Separator Kit for 02-14 WRX & STI with FMIC (Red Wrinkle)

Perrin AOS Air Oil Separator Kit for 02-14 WRX & STI with FMIC (Red Wrinkle)

Perrin AOS Air Oil Separator Kit for 02-14 WRX & STI with FMIC (Red Wrinkle)

Perrin AOS Air Oil Separator Kit for 02-14 WRX & STI with FMIC (Red Wrinkle)

PERRIN PERFORMANCE – AIR OIL SEPARATOR. PART # PSP-ENG-607RD (RED). The PERRIN Performance Air Oil Separator traps oil from the crank case vents before it enters the intake, thus increasing intercooler efficiency and reduces chances of performance-robbing detonation. Featuring swirl pot type technology and multi-layer baffles, the PERRIN Performance Air Oil Separator forces incoming air to circulate across the baffles, separating oil from engine blowby. The AOS increases intercooler efficiency by reducing the amount of oil deposited into your intercooler and intake system! As blow-by/oil builds up inside your intercooler, the less efficient it becomes due to less heat being transferred away from your engine. This leads to power loss and detonation, which can be damaging to your engine. Reduce carbon build up in the combustion chamber, intake valves, and in your intake tract. Crank case blow-by is recirculated back to the intake to be ingested by the engine, but in doing so, gets stuck in the intake tract, intake valves, and the intercooler. This builds up over time which causes a loss in power and extra wear and tear on your valve train. The octane level of oil is very low. Anytime there is a significant amount of engine blow-by (oil) being put back into your engine, it reduces your fuel’s octane level leading to detonation or knock, which will cause loss of power and engine failure. We designed the PERRIN Air Oil Separator kit based on the idea that using a PCV on the AOS outlet ensures proper crank case venting during light loads and helps reduce unwanted blow-by gases into your intake system. Incorporating a PCV reduces the smell from exhaust and keeps your intake tract clean. Easy Disassembly For Cleaning. Over the years, a slight buildup may occur inside your AOS. This can be quickly taken care of by removing one bolt to access the inside for cleaning. This small feature is one of the many things that makes the PERRIN AOS stand out from the rest. This is not a catch can! The PERRIN Air Oil Separator is not a catch can. Catch cans capture and water and oil vapor filling with a sticky oily mess requiring it to be emptied. The PERRIN AOS separates engine oil from water vapor and allows it to drain back into the engine. Oil entering from the crankcase vents spins counter clockwise through the entire body of the AOS, passing along four walls equaling roughly 50.25 sq/in of surface area. The multiple baffle walls in our compact design simulate the surface area of an AOS that is 13.5 tall! As oil accumulates on all the walls, gravity pulls it to the bottom of the can where it drains back to the engine block while water vapor and air merge with the intake air and are reburied in the engine. This means no maintenance or upkeep. The base plate of the the AOS is heated by coolant drawn from the engine. By keeping the AOS the same temperature as the engine and blow-by gases, water condensation is decreased allowing oil and water vapor to separate and pass through the can. This vital feature eliminates nearly all the sludge that can build up in the AOS body, which drastically reduce how often you must clean it. Custom Drain Back Fitting. Instead of using a universal type fitting, we have designed a purpose built crank case fitting that does the job perfectly. Like the AOS body, the drain fitting is threaded to except virtually any kind of fitting to allow for easy customization on special projects. Application Specific Mounting Brackets. Each kit comes with specific mounting brackets and instructions to install your AOS perfectly in your engine bay or adapt our simple 2 hole mounting bracket for custom installations. Every connection on the PERRIN AOS is threaded NPT which is a very universal way to connect fittings. This allows for totally customizable setups and installations to be done, to best match your setup. The item “Perrin AOS Air Oil Separator Kit for 02-14 WRX & STI with FMIC (Red Wrinkle)” is in sale since Monday, August 03, 2015. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Air Intake Systems”. The seller is “streetrays” and is located in Pflugerville, Texas. This item can be shipped to United States.
  • Manufacturer Part Number: PSP-ENG-607RD (FRONT Mount Intercooler Only)
  • Warranty: Yes
  • Part Brand: Perrin Performance

Perrin AOS Air Oil Separator Kit for 02-14 WRX & STI with FMIC (Black Wrinkle)

Tuesday, July 4th, 2017
Perrin AOS Air Oil Separator Kit for 02-14 WRX & STI with FMIC (Black Wrinkle)

Perrin AOS Air Oil Separator Kit for 02-14 WRX & STI with FMIC (Black Wrinkle)

Perrin AOS Air Oil Separator Kit for 02-14 WRX & STI with FMIC (Black Wrinkle)

Perrin AOS Air Oil Separator Kit for 02-14 WRX & STI with FMIC (Black Wrinkle)

Perrin AOS Air Oil Separator Kit for 02-14 WRX & STI with FMIC (Black Wrinkle)

Perrin AOS Air Oil Separator Kit for 02-14 WRX & STI with FMIC (Black Wrinkle)

Perrin AOS Air Oil Separator Kit for 02-14 WRX & STI with FMIC (Black Wrinkle)

Perrin AOS Air Oil Separator Kit for 02-14 WRX & STI with FMIC (Black Wrinkle)

Perrin AOS Air Oil Separator Kit for 02-14 WRX & STI with FMIC (Black Wrinkle)

Perrin AOS Air Oil Separator Kit for 02-14 WRX & STI with FMIC (Black Wrinkle)

PERRIN PERFORMANCE – AIR OIL SEPARATOR. PART # PSP-ENG-607BK (BLACK). The PERRIN Performance Air Oil Separator traps oil from the crank case vents before it enters the intake, thus increasing intercooler efficiency and reduces chances of performance-robbing detonation. Featuring swirl pot type technology and multi-layer baffles, the PERRIN Performance Air Oil Separator forces incoming air to circulate across the baffles, separating oil from engine blowby. The AOS increases intercooler efficiency by reducing the amount of oil deposited into your intercooler and intake system! As blow-by/oil builds up inside your intercooler, the less efficient it becomes due to less heat being transferred away from your engine. This leads to power loss and detonation, which can be damaging to your engine. Reduce carbon build up in the combustion chamber, intake valves, and in your intake tract. Crank case blow-by is recirculated back to the intake to be ingested by the engine, but in doing so, gets stuck in the intake tract, intake valves, and the intercooler. This builds up over time which causes a loss in power and extra wear and tear on your valve train. The octane level of oil is very low. Anytime there is a significant amount of engine blow-by (oil) being put back into your engine, it reduces your fuel’s octane level leading to detonation or knock, which will cause loss of power and engine failure. We designed the PERRIN Air Oil Separator kit based on the idea that using a PCV on the AOS outlet ensures proper crank case venting during light loads and helps reduce unwanted blow-by gases into your intake system. Incorporating a PCV reduces the smell from exhaust and keeps your intake tract clean. Easy Disassembly For Cleaning. Over the years, a slight buildup may occur inside your AOS. This can be quickly taken care of by removing one bolt to access the inside for cleaning. This small feature is one of the many things that makes the PERRIN AOS stand out from the rest. This is not a catch can! The PERRIN Air Oil Separator is not a catch can. Catch cans capture and water and oil vapor filling with a sticky oily mess requiring it to be emptied. The PERRIN AOS separates engine oil from water vapor and allows it to drain back into the engine. Oil entering from the crankcase vents spins counter clockwise through the entire body of the AOS, passing along four walls equaling roughly 50.25 sq/in of surface area. The multiple baffle walls in our compact design simulate the surface area of an AOS that is 13.5 tall! As oil accumulates on all the walls, gravity pulls it to the bottom of the can where it drains back to the engine block while water vapor and air merge with the intake air and are reburied in the engine. This means no maintenance or upkeep. The base plate of the the AOS is heated by coolant drawn from the engine. By keeping the AOS the same temperature as the engine and blow-by gases, water condensation is decreased allowing oil and water vapor to separate and pass through the can. This vital feature eliminates nearly all the sludge that can build up in the AOS body, which drastically reduce how often you must clean it. Custom Drain Back Fitting. Instead of using a universal type fitting, we have designed a purpose built crank case fitting that does the job perfectly. Like the AOS body, the drain fitting is threaded to except virtually any kind of fitting to allow for easy customization on special projects. Application Specific Mounting Brackets. Each kit comes with specific mounting brackets and instructions to install your AOS perfectly in your engine bay or adapt our simple 2 hole mounting bracket for custom installations. Every connection on the PERRIN AOS is threaded NPT which is a very universal way to connect fittings. This allows for totally customizable setups and installations to be done, to best match your setup. The item “Perrin AOS Air Oil Separator Kit for 02-14 WRX & STI with FMIC (Black Wrinkle)” is in sale since Friday, November 15, 2013. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Air Intake Systems”. The seller is “streetrays” and is located in Pflugerville, Texas. This item can be shipped to United States.
  • Manufacturer Part Number: PSP-ENG-607BK (FRONT Mount Intercooler Only)
  • Warranty: Yes
  • Part Brand: Perrin Performance

Perrin AOS Air Oil Separator Kit 2002-2014 WRX & STI with FMIC (Red Wrinkle)

Sunday, July 2nd, 2017
Perrin AOS Air Oil Separator Kit 2002-2014 WRX & STI with FMIC (Red Wrinkle)

Perrin AOS Air Oil Separator Kit 2002-2014 WRX & STI with FMIC (Red Wrinkle)

Perrin AOS Air Oil Separator Kit 2002-2014 WRX & STI with FMIC (Red Wrinkle)

Perrin AOS Air Oil Separator Kit 2002-2014 WRX & STI with FMIC (Red Wrinkle)

Perrin AOS Air Oil Separator Kit 2002-2014 WRX & STI with FMIC (Red Wrinkle)

Perrin AOS Air Oil Separator Kit 2002-2014 WRX & STI with FMIC (Red Wrinkle)

Perrin AOS Air Oil Separator Kit 2002-2014 WRX & STI with FMIC (Red Wrinkle)

Perrin AOS Air Oil Separator Kit 2002-2014 WRX & STI with FMIC (Red Wrinkle)

Perrin AOS Air Oil Separator Kit 2002-2014 WRX & STI with FMIC (Red Wrinkle)

Perrin AOS Air Oil Separator Kit 2002-2014 WRX & STI with FMIC (Red Wrinkle)

PERRIN PERFORMANCE – AIR OIL SEPARATOR. The PERRIN Performance Air Oil Separator traps oil from the crank case vents before it enters the intake, thus increasing intercooler efficiency and reduces chances of performance-robbing detonation. Featuring swirl pot type technology and multi-layer baffles, the PERRIN Performance Air Oil Separator forces incoming air to circulate across the baffles, separating oil from engine blowby. The AOS increases intercooler efficiency by reducing the amount of oil deposited into your intercooler and intake system! As blow-by/oil builds up inside your intercooler, the less efficient it becomes due to less heat being transferred away from your engine. This leads to power loss and detonation, which can be damaging to your engine. Reduce carbon build up in the combustion chamber, intake valves, and in your intake tract. Crank case blow-by is recirculated back to the intake to be ingested by the engine, but in doing so, gets stuck in the intake tract, intake valves, and the intercooler. This builds up over time which causes a loss in power and extra wear and tear on your valve train. The octane level of oil is very low. Anytime there is a significant amount of engine blow-by (oil) being put back into your engine, it reduces your fuel’s octane level leading to detonation or knock, which will cause loss of power and engine failure. We designed the PERRIN Air Oil Separator kit based on the idea that using a PCV on the AOS outlet ensures proper crank case venting during light loads and helps reduce unwanted blow-by gases into your intake system. Incorporating a PCV reduces the smell from exhaust and keeps your intake tract clean. Easy Disassembly For Cleaning. Over the years, a slight buildup may occur inside your AOS. This can be quickly taken care of by removing one bolt to access the inside for cleaning. This small feature is one of the many things that makes the PERRIN AOS stand out from the rest. This is not a catch can! The PERRIN Air Oil Separator is not a catch can. Catch cans capture and water and oil vapor filling with a sticky oily mess requiring it to be emptied. The PERRIN AOS separates engine oil from water vapor and allows it to drain back into the engine. Oil entering from the crankcase vents spins counter clockwise through the entire body of the AOS, passing along four walls equaling roughly 50.25 sq/in of surface area. The multiple baffle walls in our compact design simulate the surface area of an AOS that is 13.5 tall! As oil accumulates on all the walls, gravity pulls it to the bottom of the can where it drains back to the engine block while water vapor and air merge with the intake air and are reburied in the engine. This means no maintenance or upkeep. The base plate of the the AOS is heated by coolant drawn from the engine. By keeping the AOS the same temperature as the engine and blow-by gases, water condensation is decreased allowing oil and water vapor to separate and pass through the can. This vital feature eliminates nearly all the sludge that can build up in the AOS body, which drastically reduce how often you must clean it. Custom Drain Back Fitting. Instead of using a universal type fitting, we have designed a purpose built crank case fitting that does the job perfectly. Like the AOS body, the drain fitting is threaded to except virtually any kind of fitting to allow for easy customization on special projects. Application Specific Mounting Brackets. Each kit comes with specific mounting brackets and instructions to install your AOS perfectly in your engine bay or adapt our simple 2 hole mounting bracket for custom installations. Every connection on the PERRIN AOS is threaded NPT which is a very universal way to connect fittings. This allows for totally customizable setups and installations to be done, to best match your setup. The item “Perrin AOS Air Oil Separator Kit 2002-2014 WRX & STI with FMIC (Red Wrinkle)” is in sale since Friday, December 16, 2016. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Turbos, Nitrous, Superchargers\Turbo Chargers & Parts”. The seller is “theaftermarketshop” and is located in Madison Heights, Michigan. This item can be shipped worldwide.
  • Manufacturer Part Number: PSP-ENG-607RD
  • Interchange Part Number: Perrin Turbo Hose PSPINT410BK
  • Other Part Number: Subaru WRX STi Turbo AIR OIL SEPARATOR
  • Surface Finish: Red
  • Warranty: Lifetime
  • Brand: Perrin
  • Brand 2: 02 03 04 05 06 07 08 09 10 11 12 13 14

Red Perrin Air Oil Separator For 2002-2014 WRX 2002-2017 STi w FMIC

Saturday, June 17th, 2017
Red Perrin Air Oil Separator For 2002-2014 WRX 2002-2017 STi w FMIC

Red Perrin Air Oil Separator For 2002-2014 WRX 2002-2017 STi w FMIC

Red Perrin Air Oil Separator For 2002-2014 WRX 2002-2017 STi w FMIC

Red Perrin Air Oil Separator For 2002-2014 WRX 2002-2017 STi w FMIC

Red Perrin Air Oil Separator For 2002-2014 WRX 2002-2017 STi w FMIC

Red Perrin Air Oil Separator For 2002-2014 WRX 2002-2017 STi w FMIC

Red Perrin Air Oil Separator For 2002-2014 WRX 2002-2017 STi w FMIC

Red Perrin Air Oil Separator For 2002-2014 WRX 2002-2017 STi w FMIC

Red Perrin Air Oil Separator For 2002-2014 WRX 2002-2017 STi w FMIC

PERRIN PERFORMANCE AIR OIL SEPARATOR. NOT CARB LEGAL : NOT FOR SALE OR STREET USE IN CA & CARB STATES, WE’LL AUTOMATICALLY CANCEL ORDERS FROM CA CUSTOMERS. For PO BOX, APO/FPO, HI, AK, PR, GU, VI, MP, Canada & International customers. Most of our products are direct from distributor and are intended for jobber purpose, so they may not come with instruction manual. Professional mechanic are recommended for installation. This can avoid many problems that can often be found with an inexperienced installer of aftermarket products. All of our merchandise are insured by the carrier who assumes all the responsibility of damages, theft or lost. We will definitely fight for you. Some products are intended for off-road or show purposes only. They are not intended to be used for regular driving conditions. Please check with your local DMV for legality issue. Powered by SixBit’s eCommerce Solution. The item “Red Perrin Air Oil Separator For 2002-2014 WRX 2002-2017 STi w FMIC” is in sale since Tuesday, June 06, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Air Intake Systems”. The seller is “revotec” and is located in Reno, Nevada. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
  • Brand: Perrin Performance
  • Manufacturer Part Number: PSP-ENG-607RD
  • Warranty: Yes
  • Country/Region of Manufacture: USA
  • UPC: Does Not Apply
  • COLOR: RED
  • NOTE: 2004-2017 STi w FMIC LEFT HAND DRIVE MODELS 04 05

Crawford Air Oil Separator 08-14 STi Subaru with FMIC S0716-1

Friday, June 16th, 2017
Crawford Air Oil Separator 08-14 STi Subaru with FMIC S0716-1

Crawford Air Oil Separator 08-14 STi Subaru with FMIC S0716-1

This listing is for the newer, black version! Drawing on their 35 years of racing knowledge, the Crawford Performance Closed Loop Air/Oil Separator was engineered and designed to keep motor oil where it belongs inside the motor and out of the intake system. In the stock configuration, the crankcase is vented to the intake system in three different places. Each of these vents have a baffle system built within the motor to minimize the transfer of oil to the intake, but some oil can still make its way into the combustion chambers. When the oil enters the combustion chambers, it effectively lowers the octane of the fuel, leading to detonation. Crawford’s Air/Oil Separator effectively removes the oil from the air coming out of the engines ventilation system via a two stage process. The first step in the process is a large volumetric swirl pot. The function of the swirl pot is to use centrifugal force to remove the oil from the air. The air is then passed through a second chamber (see second step below), and extracted through the top of the AOS. Gravity then sends the remaining oil down the walls of the swirl pot and collects in the bottom of the AOS. The second step involves a second chamber located within the first chamber. As the separated air moves up inside the AOS, it must enter the second chamber before it can vent out the top of the AOS. The function of the secondary chamber is to remove any residual oil that may have made its way up the swirl pot. The secondary chamber also has a drain to return any separated oil back to the engine. Crawford’s Version 2 AOS also incorporates an internal heater to keep the AOS operating at the proper temperature. The coolant line that runs from the turbo to the engine is now re-routed through the AOS. The effectively equalizes the temperature between the AOS and the engine to avoid condensation which can occur within any AOS. This heater also makes sure the vaporized water leaving the motor makes its way through the AOS in vapor form, rather than condensing back into a liquid. This is a MUST in cold weather and a bonus for any climate. NO OTHER AOS ON THE MARKET EMPLOYS THIS TECHNOLOGY! This Kit is for the 08+ STi with a Front Mount Intercooler. Crawford Part Number — S0716-1. All orders placed over the weekend will begin being processed on the following Monday. We do welcome international orders, but we do require that all international orders are processed through Pay-Pal. We cannot guarantee any of our parts will fit non-US cars unless explicitly stated. We will not violate any international laws and declare any items less than their actual value, as a gift, or for testing purposes, etc. The item “Crawford Air Oil Separator 08-14 STi Subaru with FMIC S0716-1″ is in sale since Wednesday, May 31, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Engines & Components\Other”. The seller is “fast-imports” and is located in Boulder, Colorado. This item can be shipped worldwide.
  • Manufacturer Part Number: S0716-1
  • Part Brand: Crawford
  • Brand: Crawford

Crawford Air Oil Separator 08-14 STi Subaru with FMIC S0716-1

Saturday, May 20th, 2017
Crawford Air Oil Separator 08-14 STi Subaru with FMIC S0716-1

Crawford Air Oil Separator 08-14 STi Subaru with FMIC S0716-1

This listing is for the newer, black version! Drawing on their 35 years of racing knowledge, the Crawford Performance Closed Loop Air/Oil Separator was engineered and designed to keep motor oil where it belongs inside the motor and out of the intake system. In the stock configuration, the crankcase is vented to the intake system in three different places. Each of these vents have a baffle system built within the motor to minimize the transfer of oil to the intake, but some oil can still make its way into the combustion chambers. When the oil enters the combustion chambers, it effectively lowers the octane of the fuel, leading to detonation. Crawford’s Air/Oil Separator effectively removes the oil from the air coming out of the engines ventilation system via a two stage process. The first step in the process is a large volumetric swirl pot. The function of the swirl pot is to use centrifugal force to remove the oil from the air. The air is then passed through a second chamber (see second step below), and extracted through the top of the AOS. Gravity then sends the remaining oil down the walls of the swirl pot and collects in the bottom of the AOS. The second step involves a second chamber located within the first chamber. As the separated air moves up inside the AOS, it must enter the second chamber before it can vent out the top of the AOS. The function of the secondary chamber is to remove any residual oil that may have made its way up the swirl pot. The secondary chamber also has a drain to return any separated oil back to the engine. Crawford’s Version 2 AOS also incorporates an internal heater to keep the AOS operating at the proper temperature. The coolant line that runs from the turbo to the engine is now re-routed through the AOS. The effectively equalizes the temperature between the AOS and the engine to avoid condensation which can occur within any AOS. This heater also makes sure the vaporized water leaving the motor makes its way through the AOS in vapor form, rather than condensing back into a liquid. This is a MUST in cold weather and a bonus for any climate. NO OTHER AOS ON THE MARKET EMPLOYS THIS TECHNOLOGY! This Kit is for the 08+ STi with a Front Mount Intercooler. Crawford Part Number — S0716-1. All orders placed over the weekend will begin being processed on the following Monday. We do welcome international orders, but we do require that all international orders are processed through Pay-Pal. We cannot guarantee any of our parts will fit non-US cars unless explicitly stated. We will not violate any international laws and declare any items less than their actual value, as a gift, or for testing purposes, etc. The item “Crawford Air Oil Separator 08-14 STi Subaru with FMIC S0716-1″ is in sale since Wednesday, May 17, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Engines & Components\Other”. The seller is “fast-imports” and is located in Boulder, Colorado. This item can be shipped worldwide.
  • Manufacturer Part Number: S0716-1
  • Part Brand: Crawford
  • Brand: Crawford

Red Perrin Air Oil Separator For 2002-2014 WRX 2002-2017 STi w FMIC

Saturday, April 22nd, 2017
Red Perrin Air Oil Separator For 2002-2014 WRX 2002-2017 STi w FMIC

Red Perrin Air Oil Separator For 2002-2014 WRX 2002-2017 STi w FMIC

Red Perrin Air Oil Separator For 2002-2014 WRX 2002-2017 STi w FMIC

Red Perrin Air Oil Separator For 2002-2014 WRX 2002-2017 STi w FMIC

Red Perrin Air Oil Separator For 2002-2014 WRX 2002-2017 STi w FMIC

Red Perrin Air Oil Separator For 2002-2014 WRX 2002-2017 STi w FMIC

Red Perrin Air Oil Separator For 2002-2014 WRX 2002-2017 STi w FMIC

Red Perrin Air Oil Separator For 2002-2014 WRX 2002-2017 STi w FMIC

Red Perrin Air Oil Separator For 2002-2014 WRX 2002-2017 STi w FMIC

PERRIN PERFORMANCE AIR OIL SEPARATOR. NOT CARB LEGAL : NOT FOR SALE OR STREET USE IN CA & CARB STATES, WE’LL AUTOMATICALLY CANCEL ORDERS FROM CA CUSTOMERS. For PO BOX, APO/FPO, HI, AK, PR, GU, VI, MP, Canada & International customers. Most of our products are direct from distributor and are intended for jobber purpose, so they may not come with instruction manual. Professional mechanic are recommended for installation. This can avoid many problems that can often be found with an inexperienced installer of aftermarket products. All of our merchandise are insured by the carrier who assumes all the responsibility of damages, theft or lost. We will definitely fight for you. Some products are intended for off-road or show purposes only. They are not intended to be used for regular driving conditions. Please check with your local DMV for legality issue. Powered by SixBit’s eCommerce Solution. The item “Red Perrin Air Oil Separator For 2002-2014 WRX 2002-2017 STi w FMIC” is in sale since Wednesday, January 18, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Air Intake Systems”. The seller is “revotec” and is located in Pomona, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
  • Brand: Perrin Performance
  • Manufacturer Part Number: PSP-ENG-607RD
  • Interchange Part Number: PSP-ENG-607RD AOS
  • Other Part Number: 2002-2014 WRX w FMIC LEFT HAND DRIVE 02 03 04 05 0
  • Warranty: Yes
  • Country/Region of Manufacture: USA
  • UPC: Does Not Apply
  • COLOR: RED
  • NOTE: 2004-2017 STi w FMIC LEFT HAND DRIVE MODELS 04 05

Crawford Air Oil Separator 08-14 STi Subaru with FMIC S0716-1

Tuesday, April 18th, 2017
Crawford Air Oil Separator 08-14 STi Subaru with FMIC S0716-1

Crawford Air Oil Separator 08-14 STi Subaru with FMIC S0716-1

This listing is for the newer, black version! Drawing on their 35 years of racing knowledge, the Crawford Performance Closed Loop Air/Oil Separator was engineered and designed to keep motor oil where it belongs inside the motor and out of the intake system. In the stock configuration, the crankcase is vented to the intake system in three different places. Each of these vents have a baffle system built within the motor to minimize the transfer of oil to the intake, but some oil can still make its way into the combustion chambers. When the oil enters the combustion chambers, it effectively lowers the octane of the fuel, leading to detonation. Crawford’s Air/Oil Separator effectively removes the oil from the air coming out of the engines ventilation system via a two stage process. The first step in the process is a large volumetric swirl pot. The function of the swirl pot is to use centrifugal force to remove the oil from the air. The air is then passed through a second chamber (see second step below), and extracted through the top of the AOS. Gravity then sends the remaining oil down the walls of the swirl pot and collects in the bottom of the AOS. The second step involves a second chamber located within the first chamber. As the separated air moves up inside the AOS, it must enter the second chamber before it can vent out the top of the AOS. The function of the secondary chamber is to remove any residual oil that may have made its way up the swirl pot. The secondary chamber also has a drain to return any separated oil back to the engine. Crawford’s Version 2 AOS also incorporates an internal heater to keep the AOS operating at the proper temperature. The coolant line that runs from the turbo to the engine is now re-routed through the AOS. The effectively equalizes the temperature between the AOS and the engine to avoid condensation which can occur within any AOS. This heater also makes sure the vaporized water leaving the motor makes its way through the AOS in vapor form, rather than condensing back into a liquid. This is a MUST in cold weather and a bonus for any climate. NO OTHER AOS ON THE MARKET EMPLOYS THIS TECHNOLOGY! This Kit is for the 08+ STi with a Front Mount Intercooler. Crawford Part Number — S0716-1. All orders placed over the weekend will begin being processed on the following Monday. We do welcome international orders, but we do require that all international orders are processed through Pay-Pal. We cannot guarantee any of our parts will fit non-US cars unless explicitly stated. We will not violate any international laws and declare any items less than their actual value, as a gift, or for testing purposes, etc. The item “Crawford Air Oil Separator 08-14 STi Subaru with FMIC S0716-1″ is in sale since Monday, April 17, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Engines & Components\Other”. The seller is “fast-imports” and is located in Boulder, Colorado. This item can be shipped worldwide.
  • Manufacturer Part Number: S0716-1
  • Part Brand: Crawford
  • Brand: Crawford