SALE Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Red Wrinkle)

Saturday, September 9th, 2017
SALE Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Red Wrinkle)

We have attached photo of the item. THERE WILL BE NO RETURN AUTHORIZATION ALLOWED FOR THIS ITEM. PERRIN PERFORMANCE – AIR OIL SEPARATOR. WRX / STI 2002 -2007 WITH TMIC ONLY. PART # PSP-ENG-605RD (RED). The PERRIN Performance Air Oil Separator traps oil from the crank case vents before it enters the intake, thus increasing intercooler efficiency and reduces chances of performance-robbing detonation. Featuring swirl pot type technology and multi-layer baffles, the PERRIN Performance Air Oil Separator forces incoming air to circulate across the baffles, separating oil from engine blowby. The AOS increases intercooler efficiency by reducing the amount of oil deposited into your intercooler and intake system! As blow-by/oil builds up inside your intercooler, the less efficient it becomes due to less heat being transferred away from your engine. This leads to power loss and detonation, which can be damaging to your engine. Reduce carbon build up in the combustion chamber, intake valves, and in your intake tract. Crank case blow-by is recirculated back to the intake to be ingested by the engine, but in doing so, gets stuck in the intake tract, intake valves, and the intercooler. This builds up over time which causes a loss in power and extra wear and tear on your valve train. The octane level of oil is very low. Anytime there is a significant amount of engine blow-by (oil) being put back into your engine, it reduces your fuel’s octane level leading to detonation or knock, which will cause loss of power and engine failure. We designed the PERRIN Air Oil Separator kit based on the idea that using a PCV on the AOS outlet ensures proper crank case venting during light loads and helps reduce unwanted blow-by gases into your intake system. Incorporating a PCV reduces the smell from exhaust and keeps your intake tract clean. Easy Disassembly For Cleaning. Over the years, a slight buildup may occur inside your AOS. This can be quickly taken care of by removing one bolt to access the inside for cleaning. This small feature is one of the many things that makes the PERRIN AOS stand out from the rest. This is not a catch can! The PERRIN Air Oil Separator is not a catch can. Catch cans capture and water and oil vapor filling with a sticky oily mess requiring it to be emptied. The PERRIN AOS separates engine oil from water vapor and allows it to drain back into the engine. Oil entering from the crankcase vents spins counter clockwise through the entire body of the AOS, passing along four walls equaling roughly 50.25 sq/in of surface area. The multiple baffle walls in our compact design simulate the surface area of an AOS that is 13.5 tall! As oil accumulates on all the walls, gravity pulls it to the bottom of the can where it drains back to the engine block while water vapor and air merge with the intake air and are reburied in the engine. This means no maintenance or upkeep. The base plate of the the AOS is heated by coolant drawn from the engine. By keeping the AOS the same temperature as the engine and blow-by gases, water condensation is decreased allowing oil and water vapor to separate and pass through the can. This vital feature eliminates nearly all the sludge that can build up in the AOS body, which drastically reduce how often you must clean it. Custom Drain Back Fitting. Instead of using a universal type fitting, we have designed a purpose built crank case fitting that does the job perfectly. Like the AOS body, the drain fitting is threaded to except virtually any kind of fitting to allow for easy customization on special projects. Application Specific Mounting Brackets. Each kit comes with specific mounting brackets and instructions to install your AOS perfectly in your engine bay or adapt our simple 2 hole mounting bracket for custom installations. Every connection on the PERRIN AOS is threaded NPT which is a very universal way to connect fittings. This allows for totally customizable setups and installations to be done, to best match your setup. The item “SALE Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Red Wrinkle)” is in sale since Thursday, August 03, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Air Intake Systems”. The seller is “streetrays” and is located in Pflugerville, Texas. This item can be shipped to United States.
  • Manufacturer Part Number: PSP-ENG-605RD (Top Mount Intercooler Only)
  • Part Brand: Perrin Performance
  • Brand: Perrin Performance

SALE Perrin AOS Air Oil Separator Kit 08-14 WRX & STI with TMIC (Black Wrinkle)

Thursday, July 6th, 2017
SALE Perrin AOS Air Oil Separator Kit 08-14 WRX & STI with TMIC (Black Wrinkle)

SALE Perrin AOS Air Oil Separator Kit 08-14 WRX & STI with TMIC (Black Wrinkle)

SALE Perrin AOS Air Oil Separator Kit 08-14 WRX & STI with TMIC (Black Wrinkle)

SALE Perrin AOS Air Oil Separator Kit 08-14 WRX & STI with TMIC (Black Wrinkle)

We are placing this item in our “OPEN BOX SALE” and we attached picture’s of the item along with the complete contents of the box. PERRIN PERFORMANCE – AIR OIL SEPARATOR. The PERRIN Performance Air Oil Separator traps oil from the crank case vents before it enters the intake, thus increasing intercooler efficiency and reduces chances of performance-robbing detonation. Featuring swirl pot type technology and multi-layer baffles, the PERRIN Performance Air Oil Separator forces incoming air to circulate across the baffles, separating oil from engine blowby. The AOS increases intercooler efficiency by reducing the amount of oil deposited into your intercooler and intake system! As blow-by/oil builds up inside your intercooler, the less efficient it becomes due to less heat being transferred away from your engine. This leads to power loss and detonation, which can be damaging to your engine. Reduce carbon build up in the combustion chamber, intake valves, and in your intake tract. Crank case blow-by is recirculated back to the intake to be ingested by the engine, but in doing so, gets stuck in the intake tract, intake valves, and the intercooler. This builds up over time which causes a loss in power and extra wear and tear on your valve train. The octane level of oil is very low. Anytime there is a significant amount of engine blow-by (oil) being put back into your engine, it reduces your fuel’s octane level leading to detonation or knock, which will cause loss of power and engine failure. We designed the PERRIN Air Oil Separator kit based on the idea that using a PCV on the AOS outlet ensures proper crank case venting during light loads and helps reduce unwanted blow-by gases into your intake system. Incorporating a PCV reduces the smell from exhaust and keeps your intake tract clean. Easy Disassembly For Cleaning. Over the years, a slight buildup may occur inside your AOS. This can be quickly taken care of by removing one bolt to access the inside for cleaning. This small feature is one of the many things that makes the PERRIN AOS stand out from the rest. This is not a catch can! The PERRIN Air Oil Separator is not a catch can. Catch cans capture and water and oil vapor filling with a sticky oily mess requiring it to be emptied. The PERRIN AOS separates engine oil from water vapor and allows it to drain back into the engine. Oil entering from the crankcase vents spins counter clockwise through the entire body of the AOS, passing along four walls equaling roughly 50.25 sq/in of surface area. The multiple baffle walls in our compact design simulate the surface area of an AOS that is 13.5 tall! As oil accumulates on all the walls, gravity pulls it to the bottom of the can where it drains back to the engine block while water vapor and air merge with the intake air and are reburied in the engine. This means no maintenance or upkeep. The base plate of the the AOS is heated by coolant drawn from the engine. By keeping the AOS the same temperature as the engine and blow-by gases, water condensation is decreased allowing oil and water vapor to separate and pass through the can. This vital feature eliminates nearly all the sludge that can build up in the AOS body, which drastically reduce how often you must clean it. Custom Drain Back Fitting. Instead of using a universal type fitting, we have designed a purpose built crank case fitting that does the job perfectly. Like the AOS body, the drain fitting is threaded to except virtually any kind of fitting to allow for easy customization on special projects. Application Specific Mounting Brackets. Each kit comes with specific mounting brackets and instructions to install your AOS perfectly in your engine bay or adapt our simple 2 hole mounting bracket for custom installations. Every connection on the PERRIN AOS is threaded NPT which is a very universal way to connect fittings. This allows for totally customizable setups and installations to be done, to best match your setup. The item “SALE Perrin AOS Air Oil Separator Kit 08-14 WRX & STI with TMIC (Black Wrinkle)” is in sale since Wednesday, September 07, 2016. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Air Intake Systems”. The seller is “streetrays” and is located in Pflugerville, Texas. This item can be shipped to United States.
  • Manufacturer Part Number: PSP-ENG-606BK (Top Mount Intercooler Only)
  • Part Brand: Perrin Performance
  • Brand: Perrin Performance

SALE Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Red Wrinkle)

Tuesday, June 20th, 2017
SALE Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Red Wrinkle)

We have attached photo of the item. THERE WILL BE NO RETURN AUTHORIZATION ALLOWED FOR THIS ITEM. PERRIN PERFORMANCE – AIR OIL SEPARATOR. WRX / STI 2002 -2007 WITH TMIC ONLY. PART # PSP-ENG-605RD (RED). The PERRIN Performance Air Oil Separator traps oil from the crank case vents before it enters the intake, thus increasing intercooler efficiency and reduces chances of performance-robbing detonation. Featuring swirl pot type technology and multi-layer baffles, the PERRIN Performance Air Oil Separator forces incoming air to circulate across the baffles, separating oil from engine blowby. The AOS increases intercooler efficiency by reducing the amount of oil deposited into your intercooler and intake system! As blow-by/oil builds up inside your intercooler, the less efficient it becomes due to less heat being transferred away from your engine. This leads to power loss and detonation, which can be damaging to your engine. Reduce carbon build up in the combustion chamber, intake valves, and in your intake tract. Crank case blow-by is recirculated back to the intake to be ingested by the engine, but in doing so, gets stuck in the intake tract, intake valves, and the intercooler. This builds up over time which causes a loss in power and extra wear and tear on your valve train. The octane level of oil is very low. Anytime there is a significant amount of engine blow-by (oil) being put back into your engine, it reduces your fuel’s octane level leading to detonation or knock, which will cause loss of power and engine failure. We designed the PERRIN Air Oil Separator kit based on the idea that using a PCV on the AOS outlet ensures proper crank case venting during light loads and helps reduce unwanted blow-by gases into your intake system. Incorporating a PCV reduces the smell from exhaust and keeps your intake tract clean. Easy Disassembly For Cleaning. Over the years, a slight buildup may occur inside your AOS. This can be quickly taken care of by removing one bolt to access the inside for cleaning. This small feature is one of the many things that makes the PERRIN AOS stand out from the rest. This is not a catch can! The PERRIN Air Oil Separator is not a catch can. Catch cans capture and water and oil vapor filling with a sticky oily mess requiring it to be emptied. The PERRIN AOS separates engine oil from water vapor and allows it to drain back into the engine. Oil entering from the crankcase vents spins counter clockwise through the entire body of the AOS, passing along four walls equaling roughly 50.25 sq/in of surface area. The multiple baffle walls in our compact design simulate the surface area of an AOS that is 13.5 tall! As oil accumulates on all the walls, gravity pulls it to the bottom of the can where it drains back to the engine block while water vapor and air merge with the intake air and are reburied in the engine. This means no maintenance or upkeep. The base plate of the the AOS is heated by coolant drawn from the engine. By keeping the AOS the same temperature as the engine and blow-by gases, water condensation is decreased allowing oil and water vapor to separate and pass through the can. This vital feature eliminates nearly all the sludge that can build up in the AOS body, which drastically reduce how often you must clean it. Custom Drain Back Fitting. Instead of using a universal type fitting, we have designed a purpose built crank case fitting that does the job perfectly. Like the AOS body, the drain fitting is threaded to except virtually any kind of fitting to allow for easy customization on special projects. Application Specific Mounting Brackets. Each kit comes with specific mounting brackets and instructions to install your AOS perfectly in your engine bay or adapt our simple 2 hole mounting bracket for custom installations. Every connection on the PERRIN AOS is threaded NPT which is a very universal way to connect fittings. This allows for totally customizable setups and installations to be done, to best match your setup. The item “SALE Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Red Wrinkle)” is in sale since Monday, June 19, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Air Intake Systems”. The seller is “streetrays” and is located in Pflugerville, Texas. This item can be shipped to United States.
  • Manufacturer Part Number: PSP-ENG-605RD (Top Mount Intercooler Only)
  • Part Brand: Perrin Performance
  • Brand: Perrin Performance

SALE Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Red Wrinkle)

Friday, June 16th, 2017
SALE Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Red Wrinkle)

We have attached photo of the item. THERE WILL BE NO RETURN AUTHORIZATION ALLOWED FOR THIS ITEM. PERRIN PERFORMANCE – AIR OIL SEPARATOR. WRX / STI 2002 -2007 WITH TMIC ONLY. PART # PSP-ENG-605RD (RED). The PERRIN Performance Air Oil Separator traps oil from the crank case vents before it enters the intake, thus increasing intercooler efficiency and reduces chances of performance-robbing detonation. Featuring swirl pot type technology and multi-layer baffles, the PERRIN Performance Air Oil Separator forces incoming air to circulate across the baffles, separating oil from engine blowby. The AOS increases intercooler efficiency by reducing the amount of oil deposited into your intercooler and intake system! As blow-by/oil builds up inside your intercooler, the less efficient it becomes due to less heat being transferred away from your engine. This leads to power loss and detonation, which can be damaging to your engine. Reduce carbon build up in the combustion chamber, intake valves, and in your intake tract. Crank case blow-by is recirculated back to the intake to be ingested by the engine, but in doing so, gets stuck in the intake tract, intake valves, and the intercooler. This builds up over time which causes a loss in power and extra wear and tear on your valve train. The octane level of oil is very low. Anytime there is a significant amount of engine blow-by (oil) being put back into your engine, it reduces your fuel’s octane level leading to detonation or knock, which will cause loss of power and engine failure. We designed the PERRIN Air Oil Separator kit based on the idea that using a PCV on the AOS outlet ensures proper crank case venting during light loads and helps reduce unwanted blow-by gases into your intake system. Incorporating a PCV reduces the smell from exhaust and keeps your intake tract clean. Easy Disassembly For Cleaning. Over the years, a slight buildup may occur inside your AOS. This can be quickly taken care of by removing one bolt to access the inside for cleaning. This small feature is one of the many things that makes the PERRIN AOS stand out from the rest. This is not a catch can! The PERRIN Air Oil Separator is not a catch can. Catch cans capture and water and oil vapor filling with a sticky oily mess requiring it to be emptied. The PERRIN AOS separates engine oil from water vapor and allows it to drain back into the engine. Oil entering from the crankcase vents spins counter clockwise through the entire body of the AOS, passing along four walls equaling roughly 50.25 sq/in of surface area. The multiple baffle walls in our compact design simulate the surface area of an AOS that is 13.5 tall! As oil accumulates on all the walls, gravity pulls it to the bottom of the can where it drains back to the engine block while water vapor and air merge with the intake air and are reburied in the engine. This means no maintenance or upkeep. The base plate of the the AOS is heated by coolant drawn from the engine. By keeping the AOS the same temperature as the engine and blow-by gases, water condensation is decreased allowing oil and water vapor to separate and pass through the can. This vital feature eliminates nearly all the sludge that can build up in the AOS body, which drastically reduce how often you must clean it. Custom Drain Back Fitting. Instead of using a universal type fitting, we have designed a purpose built crank case fitting that does the job perfectly. Like the AOS body, the drain fitting is threaded to except virtually any kind of fitting to allow for easy customization on special projects. Application Specific Mounting Brackets. Each kit comes with specific mounting brackets and instructions to install your AOS perfectly in your engine bay or adapt our simple 2 hole mounting bracket for custom installations. Every connection on the PERRIN AOS is threaded NPT which is a very universal way to connect fittings. This allows for totally customizable setups and installations to be done, to best match your setup. The item “SALE Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Red Wrinkle)” is in sale since Monday, June 12, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Air Intake Systems”. The seller is “streetrays” and is located in Pflugerville, Texas. This item can be shipped to United States.
  • Manufacturer Part Number: PSP-ENG-605RD (Top Mount Intercooler Only)
  • Part Brand: Perrin Performance
  • Brand: Perrin Performance

OPEN BOX SALE GrimmSpeed(078006) 02-07 WRX/ 04-10+ STi BLK Air Oil Separator

Friday, April 7th, 2017
OPEN BOX SALE GrimmSpeed(078006) 02-07 WRX/ 04-10+ STi BLK Air Oil Separator

OPEN BOX SALE GrimmSpeed(078006) 02-07 WRX/ 04-10+ STi BLK Air Oil Separator

OPEN BOX SALE GrimmSpeed(078006) 02-07 WRX/ 04-10+ STi BLK Air Oil Separator

OPEN BOX SALE GrimmSpeed(078006) 02-07 WRX/ 04-10+ STi BLK Air Oil Separator

All the hardware and instructions are present. WE WILL NOT ACCEPT A RETURN FOR THIS ITEM(0203-03-3LB). GrimmSpeed 02-07 WRX / 04-10+ STi BLACK Air Oil Separator. An Air/Oil Separator has one job, remove the oil from the engine ventilation system so the oil does not get sent through the intake system. The GrimmSpeed Subaru Air/Oil Separator has a unique patent pending design that allows you to maintain your PCV Valve while separating the oil out of the crankcase and head ventilation air! Our AOS will allow your engine to run more efficiently due to the separation of oil from the intake system. When there is oil in your system, the result is 1 reduced fuel octane 2 higher chance of engine knock(detonation) 3 worse emissions 4 higher oil consumption. Our Subaru Air/Oil Separator will help all of these problems. In typical GrimmSpeed fashion, we have made a very compact unit that packs a powerful punch(and looks good while doing it)! No more having to check/empty your catch can and refilling your oil. The GrimmSpeed AOS coalesces oil without using a mesh media. Mesh medias can cause contaminates to collect and build up resulting in possible sludge. Our AOS is self maintained so you can just sit back, stop worrying, and enjoy driving your car! The item “OPEN BOX SALE GrimmSpeed(078006) 02-07 WRX/ 04-10+ STi BLK Air Oil Separator” is in sale since Friday, April 07, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Engines & Components\Other”. The seller is “pitstoptuningcom” and is located in Lawrenceville, Georgia. This item can be shipped to United States.
  • Manufacturer Part Number: 078006
  • Brand: GrimmSpeed

OPEN BOX SALE GrimmSpeed(078006R) 02-07 WRX/ 04-10+ STi RED Air Oil Separator

Thursday, April 6th, 2017
OPEN BOX SALE GrimmSpeed(078006R) 02-07 WRX/ 04-10+ STi RED Air Oil Separator

OPEN BOX SALE GrimmSpeed(078006R) 02-07 WRX/ 04-10+ STi RED Air Oil Separator

OPEN BOX SALE GrimmSpeed(078006R) 02-07 WRX/ 04-10+ STi RED Air Oil Separator

OPEN BOX SALE GrimmSpeed(078006R) 02-07 WRX/ 04-10+ STi RED Air Oil Separator

All the hardware and instructions are present. WE WILL NOT ACCEPT A RETURN FOR THIS ITEM(0203-03-4LB). GrimmSpeed 02-07 WRX / 04-10+ STi RED Air Oil Separator. An Air/Oil Separator has one job, remove the oil from the engine ventilation system so the oil does not get sent through the intake system. The GrimmSpeed Subaru Air/Oil Separator has a unique patent pending design that allows you to maintain your PCV Valve while separating the oil out of the crankcase and head ventilation air! Our AOS will allow your engine to run more efficiently due to the separation of oil from the intake system. When there is oil in your system, the result is 1 reduced fuel octane 2 higher chance of engine knock(detonation) 3 worse emissions 4 higher oil consumption. Our Subaru Air/Oil Separator will help all of these problems. In typical GrimmSpeed fashion, we have made a very compact unit that packs a powerful punch(and looks good while doing it)! No more having to check/empty your catch can and refilling your oil. The GrimmSpeed AOS coalesces oil without using a mesh media. Mesh medias can cause contaminates to collect and build up resulting in possible sludge. Our AOS is self maintained so you can just sit back, stop worrying, and enjoy driving your car! The item “OPEN BOX SALE GrimmSpeed(078006R) 02-07 WRX/ 04-10+ STi RED Air Oil Separator” is in sale since Thursday, April 06, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Engines & Components\Other”. The seller is “pitstoptuningcom” and is located in Lawrenceville, Georgia. This item can be shipped to United States.
  • Manufacturer Part Number: 078006R
  • Brand: GrimmSpeed