Brand New Perrin AOS Air Oil Separator Kit For 08-14 WRX & STI With TMIC RED 606RD

Saturday, July 22nd, 2017
Brand New Perrin AOS Air Oil Separator Kit For 08-14 WRX & STI With TMIC RED 606RD

Brand New Perrin AOS Air Oil Separator Kit For 08-14 WRX & STI With TMIC RED 606RD

Perrin performance AOS Air oil separator kit for 08-14 WRX & STI w/ TMIC Red Wrinkle 606RD. The item “Brand New Perrin AOS Air Oil Separator Kit For 08-14 WRX & STI With TMIC RED 606RD” is in sale since Thursday, July 20, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Engines & Components\Other”. The seller is “merrick765″ and is located in Lafayette, Indiana. This item can be shipped to United States.
  • Brand: STI

Crawford Air Oil Separator 02-07 Subaru WRX/STi TMIC

Wednesday, July 19th, 2017
Crawford Air Oil Separator 02-07 Subaru WRX/STi TMIC

Crawford Air Oil Separator 02-07 Subaru WRX/STi TMIC

This listing is for the newer, black version! Drawing on their 35 years of racing knowledge, the Crawford Performance Closed Loop Air/Oil Separator was engineered and designed to keep motor oil where it belongs inside the motor and out of the intake system. In the stock configuration, the crankcase is vented to the intake system in three different places. Each of these vents have a baffle system built within the motor to minimize the transfer of oil to the intake, but some oil can still make its way into the combustion chambers. When the oil enters the combustion chambers, it effectively lowers the octane of the fuel, leading to detonation. Crawford’s Air/Oil Separator effectively removes the oil from the air coming out of the engines ventilation system via a two stage process. The first step in the process is a large volumetric swirl pot. The function of the swirl pot is to use centrifugal force to remove the oil from the air. The air is then passed through a second chamber (see second step below), and extracted through the top of the AOS. Gravity then sends the remaining oil down the walls of the swirl pot and collects in the bottom of the AOS. The second step involves a second chamber located within the first chamber. As the separated air moves up inside the AOS, it must enter the second chamber before it can vent out the top of the AOS. The function of the secondary chamber is to remove any residual oil that may have made its way up the swirl pot. The secondary chamber also has a drain to return any separated oil back to the engine. Crawford’s Version 2 AOS also incorporates an internal heater to keep the AOS operating at the proper temperature. The coolant line that runs from the turbo to the engine is now re-routed through the AOS. The effectively equalizes the temperature between the AOS and the engine to avoid condensation which can occur within any AOS. This heater also makes sure the vaporized water leaving the motor makes its way through the AOS in vapor form, rather than condensing back into a liquid. This is a MUST in cold weather and a bonus for any climate. NO OTHER AOS ON THE MARKET EMPLOYS THIS TECHNOLOGY! Crawford Part Number — S0714-1. All orders placed over the weekend will begin being processed on the following Monday. We do welcome international orders, but we do require that all international orders are processed through Pay-Pal. We cannot guarantee any of our parts will fit non-US cars unless explicitly stated. We will not violate any international laws and declare any items less than their actual value, as a gift, or for testing purposes, etc. The item “Crawford Air Oil Separator 02-07 Subaru WRX/STi TMIC” is in sale since Saturday, July 01, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Engines & Components\Other”. The seller is “fast-imports” and is located in Boulder, Colorado. This item can be shipped worldwide.
  • Brand: Crawford
  • Manufacturer Part Number: S0714-1

Crawford Air Oil Separator AOS Kit TMIC 02-07 WRX / STI S0714B

Saturday, July 15th, 2017
Crawford Air Oil Separator AOS Kit TMIC 02-07 WRX / STI S0714B

In the stock configuration, the crankcase is vented to the intake system in three different places. Each of these vents have a baffle system built within the motor to minimize the transfer of oil to the intake, but some oil can still make its way into the combustion chambers. When the oil enters the combustion chambers, it effectively lowers the octane of the fuel, leading to detonation. Our Air/Oil Separator effectively removes the oil from the air coming out of the engines ventilation system via a two stage process: The first step in the process is a large volumetric swirl pot. The function of the swirl pot is to use centrifugal force to remove the oil from the air. The air is then passed through a second chamber (see second step below), and extracted through the top of the AOS. Gravity then sends the remaining oil down the walls of the swirl pot and collects in the bottom of the AOS. The second step involves a second chamber located within the first chamber. As the separated air moves up inside the AOS, it must enter the second chamber before it can vent out the top of the AOS. The function of the secondary chamber is to remove any residual oil that may have made its way up the swirl pot. The secondary chamber also has a drain to return any separated oil back to the engine. Our Version 2 AOS incorporates an internal heater to keep the AOS operating at the proper temperature. The coolant line that runs from the turbo to the engine is now re-routed through the AOS. The effectively equalizes the temperature between the AOS and the engine to avoid condensation which can occur within any AOS. This heater also makes sure the vaporized water leaving the motor makes its way through the AOS in vapor form, rather than condensing back into a liquid. This is a MUST in cold weather and a bonus for any climate. NO OTHER AOS ON THE MARKET EMPLOYS THIS TECHNOLOGY! Special orders from MFGs can take longer depending on MFG, availability, etc. Customer Service Your complete shopping satisfaction is our #1 priority. Please DO NOT return item(s) to us without prior return authorization. The item “Crawford Air Oil Separator AOS Kit TMIC 02-07 WRX / STI S0714B” is in sale since Friday, June 30, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Engines & Components\Other”. The seller is “sakarimotorsports” and is located in Duluth, Georgia. This item can be shipped to United States.
  • Brand: Crawford
  • Manufacturer Part Number: S0714B

Perrin Air/Oil Separator for 02-07 WRX/STI With TMIC Black PSP-ENG-605BK

Saturday, July 15th, 2017
Perrin Air/Oil Separator for 02-07 WRX/STI With TMIC Black PSP-ENG-605BK

Perrin Air/Oil Separator for 02-07 WRX/STI With TMIC Black PSP-ENG-605BK

The PERRIN Performance Air Oil Separator traps oil from the crank case vents before it enters the intake, thus increasing intercooler efficiency and reduces chances of performance-robbing detonation. The AOS increases intercooler efficiency by reducing the amount of oil deposited into your intercooler and intake system! As blow-by/oil builds up inside your intercooler, the less efficient it becomes due to less heat being transferred away from your engine. This leads to power loss and detonation, which can be damaging to your engine. Reduce carbon build up in the combustion chamber, intake valves, and in your intake tract. Crank case blow-by is recirculated back to the intake to be ingested by the engine, but in doing so, gets stuck in the intake tract, intake valves, and the intercooler. This builds up over time which causes a loss in power and extra wear and tear on your valve train. The octane level of oil is very low. Anytime there is a significant amount of engine blow-by (oil) being put back into your engine, it reduces your fuel’s octane level leading to detonation or knock, which will cause loss of power and engine failure. We designed the PERRIN Air Oil Separator kit based on the idea that using a PCV on the AOS outlet ensures proper crank case venting during light loads and helps reduce unwanted blow-by gases into your intake system. Incorporating a PCV reduces the smell from exhaust and keeps your intake tract clean. Easy Disassembly For Cleaning. Over the years, a slight buildup may occur inside your AOS. This can be quickly taken care of by removing one bolt to access the inside for cleaning. This small feature is one of the many things that makes the PERRIN AOS stand out from the rest. The base plate of the the AOS is heated by coolant drawn from the engine. By keeping the AOS the same temperature as the engine and blow-by gases, water condensation is decreased allowing oil and water vapor to separate and pass through the can. This vital feature eliminates nearly all the sludge that can build up in the AOS body, which drastically reduce how often you must clean it. Powder coated for protection against the elements, the textured finish will look awesome for years to come. The PERRIN AOS is available in black or red texture powder coating. PERRIN PART NUMBER – PSP-ENG-605BK. All orders placed over the weekend will begin being processed on the following Monday. We do welcome international orders, but we do require that all international orders are processed through Pay-Pal. We will not violate any international laws and declare any items less than their actual value, as a gift, or for testing purposes, etc. The item “Perrin Air/Oil Separator for 02-07 WRX/STI With TMIC Black PSP-ENG-605BK” is in sale since Friday, June 30, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Engines & Components\Other”. The seller is “fast-imports” and is located in Boulder, Colorado. This item can be shipped worldwide.
  • Brand: PERRIN
  • Manufacturer Part Number: PSP-ENG-605BK

Perrin Air/Oil Separator for 08-14 WRX/STI With TMIC Black Brand New

Friday, July 14th, 2017
Perrin Air/Oil Separator for 08-14 WRX/STI With TMIC Black Brand New

AIR OIL SEPARATOR FOR WRX/STI 08-14 W/ FRONT MOUNT INTERCOOLER. The AOS increases intercooler efficiency by reducing the amount of oil deposited into your intercooler and intake system! As blow-by/oil builds up inside your intercooler, the less efficient it becomes due to less heat being transferred away from your engine. This leads to power loss and detonation, which can be damaging to your engine. Reduce carbon build up in the combustion chamber, intake valves, and in your intake tract. Crank case blow-by is recirculated back to the intake to be ingested by the engine, but in doing so, gets stuck in the intake tract, intake valves, and the intercooler. This builds up over time which causes a loss in power and extra wear and tear on your valves. The octane level of oil is very low. Anytime there is a significant amount of engine blow-by (oil) being put back into your engine, it reduces your fuel’s octane level leading to detonation or knock, which will cause loss of power and engine failure. We designed the PERRIN Air Oil Separator kit based on the idea that using a PCV on the AOS outlet ensures proper crank case venting during light loads and helps reduce unwanted blow-by gases into your intake system. Incorporating a PCV reduces the smell from exhaust and keeps your intake tract clean. Easy Disassembly For Cleaning. Over the years, a slight buildup may occur inside your AOS. This can be quickly taken care of by removing one bolt to access the inside for cleaning. This small feature is one of the many things that makes the PERRIN AOS stand out from the rest. THIS IS NOT A CATCH CAN. The PERRIN Air Oil Separator is not a catch can. Catch cans capture water and oil vapor filling with a sticky mess requiring it to be emptied. The PERRIN AOS separates engine oil from water vapor and allows it to drain back into the engine. Oil entering from the crankcase vents spins counter clockwise through the entire body of the AOS, passing along four walls equaling roughly 50.25 sq/in of surface area. The multiple baffle walls in our compact design simulate the surface area of an AOS that is 13.5 tall! As oil accumulates on all the walls, gravity pulls it to the bottom of the can where it drains back to the engine block while water vapor and air merge with the intake air and are re-burned in the engine. This means little maintenance or upkeep. All orders placed over the weekend will begin being processed on the following Monday. We do welcome international orders, but we do require that all international orders are processed through Pay-Pal. We will not violate any international laws and declare any items less than their actual value, as a gift, or for testing purposes, etc. The item “Perrin Air/Oil Separator for 08-14 WRX/STI With TMIC Black Brand New” is in sale since Thursday, June 29, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Engines & Components\Other”. The seller is “fast-imports” and is located in Boulder, Colorado. This item can be shipped worldwide.
  • Brand: Perrin
  • Manufacturer Part Number: PSP-ENG-607BK

Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Black Wrinkle)

Sunday, July 9th, 2017
Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Black Wrinkle)

Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Black Wrinkle)

Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Black Wrinkle)

Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Black Wrinkle)

Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Black Wrinkle)

Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Black Wrinkle)

Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Black Wrinkle)

Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Black Wrinkle)

Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Black Wrinkle)

Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Black Wrinkle)

PERRIN PERFORMANCE – AIR OIL SEPARATOR. WRX / STI 2002 -2007 WITH TMIC. The PERRIN Performance Air Oil Separator traps oil from the crank case vents before it enters the intake, thus increasing intercooler efficiency and reduces chances of performance-robbing detonation. Featuring swirl pot type technology and multi-layer baffles, the PERRIN Performance Air Oil Separator forces incoming air to circulate across the baffles, separating oil from engine blowby. The AOS increases intercooler efficiency by reducing the amount of oil deposited into your intercooler and intake system! As blow-by/oil builds up inside your intercooler, the less efficient it becomes due to less heat being transferred away from your engine. This leads to power loss and detonation, which can be damaging to your engine. Reduce carbon build up in the combustion chamber, intake valves, and in your intake tract. Crank case blow-by is recirculated back to the intake to be ingested by the engine, but in doing so, gets stuck in the intake tract, intake valves, and the intercooler. This builds up over time which causes a loss in power and extra wear and tear on your valve train. The octane level of oil is very low. Anytime there is a significant amount of engine blow-by (oil) being put back into your engine, it reduces your fuel’s octane level leading to detonation or knock, which will cause loss of power and engine failure. We designed the PERRIN Air Oil Separator kit based on the idea that using a PCV on the AOS outlet ensures proper crank case venting during light loads and helps reduce unwanted blow-by gases into your intake system. Incorporating a PCV reduces the smell from exhaust and keeps your intake tract clean. Easy Disassembly For Cleaning. Over the years, a slight buildup may occur inside your AOS. This can be quickly taken care of by removing one bolt to access the inside for cleaning. This small feature is one of the many things that makes the PERRIN AOS stand out from the rest. This is not a catch can! The PERRIN Air Oil Separator is not a catch can. Catch cans capture and water and oil vapor filling with a sticky oily mess requiring it to be emptied. The PERRIN AOS separates engine oil from water vapor and allows it to drain back into the engine. Oil entering from the crankcase vents spins counter clockwise through the entire body of the AOS, passing along four walls equaling roughly 50.25 sq/in of surface area. The multiple baffle walls in our compact design simulate the surface area of an AOS that is 13.5 tall! As oil accumulates on all the walls, gravity pulls it to the bottom of the can where it drains back to the engine block while water vapor and air merge with the intake air and are reburied in the engine. This means no maintenance or upkeep. The base plate of the the AOS is heated by coolant drawn from the engine. By keeping the AOS the same temperature as the engine and blow-by gases, water condensation is decreased allowing oil and water vapor to separate and pass through the can. This vital feature eliminates nearly all the sludge that can build up in the AOS body, which drastically reduce how often you must clean it. Custom Drain Back Fitting. Instead of using a universal type fitting, we have designed a purpose built crank case fitting that does the job perfectly. Like the AOS body, the drain fitting is threaded to except virtually any kind of fitting to allow for easy customization on special projects. Application Specific Mounting Brackets. Each kit comes with specific mounting brackets and instructions to install your AOS perfectly in your engine bay or adapt our simple 2 hole mounting bracket for custom installations. Every connection on the PERRIN AOS is threaded NPT which is a very universal way to connect fittings. This allows for totally customizable setups and installations to be done, to best match your setup. The item “Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Black Wrinkle)” is in sale since Friday, November 15, 2013. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Air Intake Systems”. The seller is “streetrays” and is located in Pflugerville, Texas. This item can be shipped to United States.
  • Manufacturer Part Number: PSP-ENG-605BK (Top Mount Intercooler Only)
  • Warranty: Yes
  • Part Brand: Perrin Performance

Perrin AOS Air Oil Separator Kit for 08-14 WRX & STI with TMIC (Red Wrinkle)

Saturday, July 8th, 2017
Perrin AOS Air Oil Separator Kit for 08-14 WRX & STI with TMIC (Red Wrinkle)

Perrin AOS Air Oil Separator Kit for 08-14 WRX & STI with TMIC (Red Wrinkle)

Perrin AOS Air Oil Separator Kit for 08-14 WRX & STI with TMIC (Red Wrinkle)

Perrin AOS Air Oil Separator Kit for 08-14 WRX & STI with TMIC (Red Wrinkle)

Perrin AOS Air Oil Separator Kit for 08-14 WRX & STI with TMIC (Red Wrinkle)

Perrin AOS Air Oil Separator Kit for 08-14 WRX & STI with TMIC (Red Wrinkle)

Perrin AOS Air Oil Separator Kit for 08-14 WRX & STI with TMIC (Red Wrinkle)

Perrin AOS Air Oil Separator Kit for 08-14 WRX & STI with TMIC (Red Wrinkle)

PERRIN PERFORMANCE – AIR OIL SEPARATOR. PART # PSP-ENG-606RD (RED). The PERRIN Performance Air Oil Separator traps oil from the crank case vents before it enters the intake, thus increasing intercooler efficiency and reduces chances of performance-robbing detonation. Featuring swirl pot type technology and multi-layer baffles, the PERRIN Performance Air Oil Separator forces incoming air to circulate across the baffles, separating oil from engine blowby. The AOS increases intercooler efficiency by reducing the amount of oil deposited into your intercooler and intake system! As blow-by/oil builds up inside your intercooler, the less efficient it becomes due to less heat being transferred away from your engine. This leads to power loss and detonation, which can be damaging to your engine. Reduce carbon build up in the combustion chamber, intake valves, and in your intake tract. Crank case blow-by is recirculated back to the intake to be ingested by the engine, but in doing so, gets stuck in the intake tract, intake valves, and the intercooler. This builds up over time which causes a loss in power and extra wear and tear on your valve train. The octane level of oil is very low. Anytime there is a significant amount of engine blow-by (oil) being put back into your engine, it reduces your fuel’s octane level leading to detonation or knock, which will cause loss of power and engine failure. We designed the PERRIN Air Oil Separator kit based on the idea that using a PCV on the AOS outlet ensures proper crank case venting during light loads and helps reduce unwanted blow-by gases into your intake system. Incorporating a PCV reduces the smell from exhaust and keeps your intake tract clean. Easy Disassembly For Cleaning. Over the years, a slight buildup may occur inside your AOS. This can be quickly taken care of by removing one bolt to access the inside for cleaning. This small feature is one of the many things that makes the PERRIN AOS stand out from the rest. This is not a catch can! The PERRIN Air Oil Separator is not a catch can. Catch cans capture and water and oil vapor filling with a sticky oily mess requiring it to be emptied. The PERRIN AOS separates engine oil from water vapor and allows it to drain back into the engine. Oil entering from the crankcase vents spins counter clockwise through the entire body of the AOS, passing along four walls equaling roughly 50.25 sq/in of surface area. The multiple baffle walls in our compact design simulate the surface area of an AOS that is 13.5 tall! As oil accumulates on all the walls, gravity pulls it to the bottom of the can where it drains back to the engine block while water vapor and air merge with the intake air and are reburied in the engine. This means no maintenance or upkeep. The base plate of the the AOS is heated by coolant drawn from the engine. By keeping the AOS the same temperature as the engine and blow-by gases, water condensation is decreased allowing oil and water vapor to separate and pass through the can. This vital feature eliminates nearly all the sludge that can build up in the AOS body, which drastically reduce how often you must clean it. Custom Drain Back Fitting. Instead of using a universal type fitting, we have designed a purpose built crank case fitting that does the job perfectly. Like the AOS body, the drain fitting is threaded to except virtually any kind of fitting to allow for easy customization on special projects. Application Specific Mounting Brackets. Each kit comes with specific mounting brackets and instructions to install your AOS perfectly in your engine bay or adapt our simple 2 hole mounting bracket for custom installations. Every connection on the PERRIN AOS is threaded NPT which is a very universal way to connect fittings. This allows for totally customizable setups and installations to be done, to best match your setup. The item “Perrin AOS Air Oil Separator Kit for 08-14 WRX & STI with TMIC (Red Wrinkle)” is in sale since Friday, November 15, 2013. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Air Intake Systems”. The seller is “streetrays” and is located in Pflugerville, Texas. This item can be shipped to United States.
  • Manufacturer Part Number: PSP-ENG-606RD (Top Mount Intercooler Only)
  • Warranty: Yes
  • Part Brand: Perrin Performance

Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Red Wrinkle)

Thursday, July 6th, 2017
Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Red Wrinkle)

Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Red Wrinkle)

Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Red Wrinkle)

Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Red Wrinkle)

Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Red Wrinkle)

Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Red Wrinkle)

Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Red Wrinkle)

Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Red Wrinkle)

Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Red Wrinkle)

Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Red Wrinkle)

PERRIN PERFORMANCE – AIR OIL SEPARATOR. WRX / STI 2002 -2007 WITH TMIC ONLY. PART # PSP-ENG-605RD (RED). The PERRIN Performance Air Oil Separator traps oil from the crank case vents before it enters the intake, thus increasing intercooler efficiency and reduces chances of performance-robbing detonation. Featuring swirl pot type technology and multi-layer baffles, the PERRIN Performance Air Oil Separator forces incoming air to circulate across the baffles, separating oil from engine blowby. The AOS increases intercooler efficiency by reducing the amount of oil deposited into your intercooler and intake system! As blow-by/oil builds up inside your intercooler, the less efficient it becomes due to less heat being transferred away from your engine. This leads to power loss and detonation, which can be damaging to your engine. Reduce carbon build up in the combustion chamber, intake valves, and in your intake tract. Crank case blow-by is recirculated back to the intake to be ingested by the engine, but in doing so, gets stuck in the intake tract, intake valves, and the intercooler. This builds up over time which causes a loss in power and extra wear and tear on your valve train. The octane level of oil is very low. Anytime there is a significant amount of engine blow-by (oil) being put back into your engine, it reduces your fuel’s octane level leading to detonation or knock, which will cause loss of power and engine failure. We designed the PERRIN Air Oil Separator kit based on the idea that using a PCV on the AOS outlet ensures proper crank case venting during light loads and helps reduce unwanted blow-by gases into your intake system. Incorporating a PCV reduces the smell from exhaust and keeps your intake tract clean. Easy Disassembly For Cleaning. Over the years, a slight buildup may occur inside your AOS. This can be quickly taken care of by removing one bolt to access the inside for cleaning. This small feature is one of the many things that makes the PERRIN AOS stand out from the rest. This is not a catch can! The PERRIN Air Oil Separator is not a catch can. Catch cans capture and water and oil vapor filling with a sticky oily mess requiring it to be emptied. The PERRIN AOS separates engine oil from water vapor and allows it to drain back into the engine. Oil entering from the crankcase vents spins counter clockwise through the entire body of the AOS, passing along four walls equaling roughly 50.25 sq/in of surface area. The multiple baffle walls in our compact design simulate the surface area of an AOS that is 13.5 tall! As oil accumulates on all the walls, gravity pulls it to the bottom of the can where it drains back to the engine block while water vapor and air merge with the intake air and are reburied in the engine. This means no maintenance or upkeep. The base plate of the the AOS is heated by coolant drawn from the engine. By keeping the AOS the same temperature as the engine and blow-by gases, water condensation is decreased allowing oil and water vapor to separate and pass through the can. This vital feature eliminates nearly all the sludge that can build up in the AOS body, which drastically reduce how often you must clean it. Custom Drain Back Fitting. Instead of using a universal type fitting, we have designed a purpose built crank case fitting that does the job perfectly. Like the AOS body, the drain fitting is threaded to except virtually any kind of fitting to allow for easy customization on special projects. Application Specific Mounting Brackets. Each kit comes with specific mounting brackets and instructions to install your AOS perfectly in your engine bay or adapt our simple 2 hole mounting bracket for custom installations. Every connection on the PERRIN AOS is threaded NPT which is a very universal way to connect fittings. This allows for totally customizable setups and installations to be done, to best match your setup. The item “Perrin AOS Air Oil Separator Kit for 02-07 WRX & STI with TMIC (Red Wrinkle)” is in sale since Friday, November 15, 2013. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Air Intake Systems”. The seller is “streetrays” and is located in Pflugerville, Texas. This item can be shipped to United States.
  • Manufacturer Part Number: PSP-ENG-605RD (Top Mount Intercooler Only)
  • Warranty: Yes
  • Part Brand: Perrin Performance

SALE Perrin AOS Air Oil Separator Kit 08-14 WRX & STI with TMIC (Black Wrinkle)

Thursday, July 6th, 2017
SALE Perrin AOS Air Oil Separator Kit 08-14 WRX & STI with TMIC (Black Wrinkle)

SALE Perrin AOS Air Oil Separator Kit 08-14 WRX & STI with TMIC (Black Wrinkle)

SALE Perrin AOS Air Oil Separator Kit 08-14 WRX & STI with TMIC (Black Wrinkle)

SALE Perrin AOS Air Oil Separator Kit 08-14 WRX & STI with TMIC (Black Wrinkle)

We are placing this item in our “OPEN BOX SALE” and we attached picture’s of the item along with the complete contents of the box. PERRIN PERFORMANCE – AIR OIL SEPARATOR. The PERRIN Performance Air Oil Separator traps oil from the crank case vents before it enters the intake, thus increasing intercooler efficiency and reduces chances of performance-robbing detonation. Featuring swirl pot type technology and multi-layer baffles, the PERRIN Performance Air Oil Separator forces incoming air to circulate across the baffles, separating oil from engine blowby. The AOS increases intercooler efficiency by reducing the amount of oil deposited into your intercooler and intake system! As blow-by/oil builds up inside your intercooler, the less efficient it becomes due to less heat being transferred away from your engine. This leads to power loss and detonation, which can be damaging to your engine. Reduce carbon build up in the combustion chamber, intake valves, and in your intake tract. Crank case blow-by is recirculated back to the intake to be ingested by the engine, but in doing so, gets stuck in the intake tract, intake valves, and the intercooler. This builds up over time which causes a loss in power and extra wear and tear on your valve train. The octane level of oil is very low. Anytime there is a significant amount of engine blow-by (oil) being put back into your engine, it reduces your fuel’s octane level leading to detonation or knock, which will cause loss of power and engine failure. We designed the PERRIN Air Oil Separator kit based on the idea that using a PCV on the AOS outlet ensures proper crank case venting during light loads and helps reduce unwanted blow-by gases into your intake system. Incorporating a PCV reduces the smell from exhaust and keeps your intake tract clean. Easy Disassembly For Cleaning. Over the years, a slight buildup may occur inside your AOS. This can be quickly taken care of by removing one bolt to access the inside for cleaning. This small feature is one of the many things that makes the PERRIN AOS stand out from the rest. This is not a catch can! The PERRIN Air Oil Separator is not a catch can. Catch cans capture and water and oil vapor filling with a sticky oily mess requiring it to be emptied. The PERRIN AOS separates engine oil from water vapor and allows it to drain back into the engine. Oil entering from the crankcase vents spins counter clockwise through the entire body of the AOS, passing along four walls equaling roughly 50.25 sq/in of surface area. The multiple baffle walls in our compact design simulate the surface area of an AOS that is 13.5 tall! As oil accumulates on all the walls, gravity pulls it to the bottom of the can where it drains back to the engine block while water vapor and air merge with the intake air and are reburied in the engine. This means no maintenance or upkeep. The base plate of the the AOS is heated by coolant drawn from the engine. By keeping the AOS the same temperature as the engine and blow-by gases, water condensation is decreased allowing oil and water vapor to separate and pass through the can. This vital feature eliminates nearly all the sludge that can build up in the AOS body, which drastically reduce how often you must clean it. Custom Drain Back Fitting. Instead of using a universal type fitting, we have designed a purpose built crank case fitting that does the job perfectly. Like the AOS body, the drain fitting is threaded to except virtually any kind of fitting to allow for easy customization on special projects. Application Specific Mounting Brackets. Each kit comes with specific mounting brackets and instructions to install your AOS perfectly in your engine bay or adapt our simple 2 hole mounting bracket for custom installations. Every connection on the PERRIN AOS is threaded NPT which is a very universal way to connect fittings. This allows for totally customizable setups and installations to be done, to best match your setup. The item “SALE Perrin AOS Air Oil Separator Kit 08-14 WRX & STI with TMIC (Black Wrinkle)” is in sale since Wednesday, September 07, 2016. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Air Intake Systems”. The seller is “streetrays” and is located in Pflugerville, Texas. This item can be shipped to United States.
  • Manufacturer Part Number: PSP-ENG-606BK (Top Mount Intercooler Only)
  • Part Brand: Perrin Performance
  • Brand: Perrin Performance

Perrin Red Air Oil Separator for 2008-2014 Subaru WRX / 2008-2017 STi with TMIC

Tuesday, July 4th, 2017
Perrin Red Air Oil Separator for 2008-2014 Subaru WRX / 2008-2017 STi with TMIC

Perrin Red Air Oil Separator for 2008-2014 Subaru WRX / 2008-2017 STi with TMIC

Perrin Red Air Oil Separator for 2008-2014 Subaru WRX / 2008-2017 STi with TMIC

Perrin Red Air Oil Separator for 2008-2014 Subaru WRX / 2008-2017 STi with TMIC

Perrin Red Air Oil Separator for 2008-2014 Subaru WRX / 2008-2017 STi with TMIC

Perrin Red Air Oil Separator for 2008-2014 Subaru WRX / 2008-2017 STi with TMIC

Perrin Red Air Oil Separator for 2008-2014 Subaru WRX / 2008-2017 STi with TMIC

Perrin Red Air Oil Separator for 2008-2014 Subaru WRX / 2008-2017 STi with TMIC

Perrin Red Air Oil Separator for 2008-2014 Subaru WRX / 2008-2017 STi with TMIC

Perrin Red Air Oil Separator for 2008-2014 Subaru WRX / 2008-2017 STi with TMIC

Perrin Performance Air Oil Separator (RED). The PERRIN Air Oil Separator traps oil from the crank case vents before it enters the intake, increasing intercooler efficiency, and reduces chances of performance-robbing detonation. INCREASE INTERCOOLER EFFICIENCY The AOS increases intercooler efficiency by reducing the amount of oil deposited into your intercooler and intake system! As blow-by/oil builds up inside your intercooler, the less efficient it becomes due to less heat being transferred away from your engine. This leads to power loss and detonation, which can be damaging to your engine. REDUCE CARBON BUILDUP Reduce carbon build up in the combustion chamber, intake valves, and in your intake tract. Crank case blow-by is recirculated back to the intake to be ingested by the engine, but in doing so, gets stuck in the intake tract, intake valves, and the intercooler. This builds up over time which causes a loss in power and extra wear and tear on your valves. Reduce Detonation The octane level of oil is very low. Anytime there is a significant amount of engine blow-by (oil) being put back into your engine, it reduces your fuel’s octane level leading to detonation or knock, which will cause loss of power and engine failure. PCV System Included We designed the PERRIN Air Oil Separator kit based on the idea that using a PCV on the AOS outlet ensures proper crank case venting during light loads and helps reduce unwanted blow-by gases into your intake system. Incorporating a PCV reduces the smell from exhaust and keeps your intake tract clean. Easy Disassembly For Cleaning Over the years, a slight buildup may occur inside your AOS. This can be quickly taken care of by removing one bolt to access the inside for cleaning. This small feature is one of the many things that makes the PERRIN AOS stand out from the rest. THIS IS NOT A CATCH CAN. The PERRIN Air Oil Separator is not a catch can. Catch cans capture water and oil vapor filling with a sticky mess requiring it to be emptied. The PERRIN AOS separates engine oil from water vapor and allows it to drain back into the engine. Oil entering from the crankcase vents spins counter clockwise through the entire body of the AOS, passing along four walls equaling roughly 50.25 sq/in of surface area. The multiple baffle walls in our compact design simulate the surface area of an AOS that is 13.5 tall! As oil accumulates on all the walls, gravity pulls it to the bottom of the can where it drains back to the engine block while water vapor and air merge with the intake air and are re-burned in the engine. This means little maintenance or upkeep. CUSTOM DRAIN BACK FITTING. Instead of using a universal type fitting, we have designed a purpose built crank case fitting that does the job perfectly. Like the AOS body, the drain fitting is threaded to except virtually any kind of fitting to allow for easy customization on special projects. The base plate of the the AOS is heated by coolant drawn from the engine. By keeping the AOS the same temperature as the engine and blow-by gases, water condensation is decreased allowing oil and water vapor to separate and pass through the can. This vital feature eliminates nearly all the sludge that can build up in the AOS body, which drastically reduce how often you must clean it. Subaru engines have 3 main crank case vents located on each valve cover, and one in the center crank case. The PERRIN AOS is designed to connect to each of these separately without requiring any T connections. This allows for better venting and reduces the chance of oil being ingested during high G corners common issue on flat type or boxer engines. Powder coated for protection against the elements, the textured finish will look awesome for years to come. For Left Hand Drive Vehicle only Do not fit vehicle with FMIC (Front Mount intercooler). Please inspect your order upon receipt. Returning an item without following proper procedures will delay the claim process, and we reserve the right to refuse any unauthorized return packages. In some occasions we might request images as supporting document for damage/ defective claims to help us determine the best and most effective resolution toward the problem. Powered by SixBit’s eCommerce Solution. The item “Perrin Red Air Oil Separator for 2008-2014 Subaru WRX / 2008-2017 STi with TMIC” is in sale since Friday, May 15, 2015. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Turbos, Nitrous, Superchargers\Turbo Chargers & Parts”. The seller is “sabersport” and is located in USA. This item can be shipped to United States, Canada, United Kingdom, Australia, Mexico, Germany, Japan, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, Sweden, South Korea, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Russian federation, Israel, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama.
  • Note: Not CARB legal: Not for sale or street use in Cali
  • Brand: Perrin Performance
  • Manufacturer Part Number: PSP-ENG-606RD
  • Surface Finish: Textured Poweder Coat
  • Warranty: Yes
  • Country/Region of Manufacture: United States
  • Availability: IN STOCK, SHIP OUT WITHIN ONE BUSINESS DAY
  • UPC: Does Not Apply