CP V2 Air/Oil Separator 2002-2007 WRX/STI with Front Mount Intercooler(Right H)

Wednesday, July 19th, 2017
CP V2 Air/Oil Separator 2002-2007 WRX/STI with Front Mount Intercooler(Right H)

CP V2 Air/Oil Separator 2002-2007 WRX/STI with Front Mount Intercooler(Right H)

Not a Catch Can – Closed Loop and Maintenance Free. Reduce Detonation and Risk of Engine Failure. Reduce Fuel Dilution and Subsequent Power Loss. Added Coolant Bypass Line to Avoid Condensation. Can is Heated for Cold Climates and Short Drives. The Crawford Performance Air/Oil Separator (AOS) is the original solution to Subaru’s notorious oiling system issues. Although the technology was pre-existing with other vehicle brands such as Porsche, Crawford Performance is the inventor of the first system specifically for Subaru. No other AOS on the market employs the same technology. How does it work? The built in AOS that comes factory in Subaru Engines is only semi-efficient at stock power levels. Any added power/stress/heat and G-Forces increases the amount of excess oil that ends up in your intake. Due to the fact the oil is heavier than water and you’re dealing with a horizontally-opposed engine, the oil can only end up in one place: coating the tops of your pistons. Since oil is naturally combustible, this causes irregularities with the controlled explosion that happens in this environment, subsequently creating multiple explosions. Another word for this is detonation an engine killer. Stop the oil from ever getting there with the Crawford Air/Oil Separator. Having a secondary system is your fail-safe for detonation that is un-related to a poor tune. You will also consume less oil and help maintain the ultimate mixture in your cylinders to maximaize your power output. This kit includes the can itself, and all necessary hoses and fittings to install. The install does take some mechanical knowledge, so we suggest taking your car in to a professional for installation. That being said, we provide step by step instructions so that enthusiasts can install the kit at home with a few simple tools. Fitment: Designed to fit with Front Mount Intercoolers. Unit is mounted on the pitch stop. For Right-Hand-Drive vehicles only. The item “CP V2 Air/Oil Separator 2002-2007 WRX/STI with Front Mount Intercooler(Right H)” is in sale since Wednesday, July 05, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Engines & Components\Other”. The seller is “crawfordperformance” and is located in Oceanside, California. This item can be shipped worldwide.
  • Brand: Crawford Perfomance
  • Manufacturer Part Number: S0715-2
  • Country/Region of Manufacture: United States

Crawford Air Oil Separator 02-07 Subaru WRX/STi TMIC

Wednesday, July 19th, 2017
Crawford Air Oil Separator 02-07 Subaru WRX/STi TMIC

Crawford Air Oil Separator 02-07 Subaru WRX/STi TMIC

This listing is for the newer, black version! Drawing on their 35 years of racing knowledge, the Crawford Performance Closed Loop Air/Oil Separator was engineered and designed to keep motor oil where it belongs inside the motor and out of the intake system. In the stock configuration, the crankcase is vented to the intake system in three different places. Each of these vents have a baffle system built within the motor to minimize the transfer of oil to the intake, but some oil can still make its way into the combustion chambers. When the oil enters the combustion chambers, it effectively lowers the octane of the fuel, leading to detonation. Crawford’s Air/Oil Separator effectively removes the oil from the air coming out of the engines ventilation system via a two stage process. The first step in the process is a large volumetric swirl pot. The function of the swirl pot is to use centrifugal force to remove the oil from the air. The air is then passed through a second chamber (see second step below), and extracted through the top of the AOS. Gravity then sends the remaining oil down the walls of the swirl pot and collects in the bottom of the AOS. The second step involves a second chamber located within the first chamber. As the separated air moves up inside the AOS, it must enter the second chamber before it can vent out the top of the AOS. The function of the secondary chamber is to remove any residual oil that may have made its way up the swirl pot. The secondary chamber also has a drain to return any separated oil back to the engine. Crawford’s Version 2 AOS also incorporates an internal heater to keep the AOS operating at the proper temperature. The coolant line that runs from the turbo to the engine is now re-routed through the AOS. The effectively equalizes the temperature between the AOS and the engine to avoid condensation which can occur within any AOS. This heater also makes sure the vaporized water leaving the motor makes its way through the AOS in vapor form, rather than condensing back into a liquid. This is a MUST in cold weather and a bonus for any climate. NO OTHER AOS ON THE MARKET EMPLOYS THIS TECHNOLOGY! Crawford Part Number — S0714-1. All orders placed over the weekend will begin being processed on the following Monday. We do welcome international orders, but we do require that all international orders are processed through Pay-Pal. We cannot guarantee any of our parts will fit non-US cars unless explicitly stated. We will not violate any international laws and declare any items less than their actual value, as a gift, or for testing purposes, etc. The item “Crawford Air Oil Separator 02-07 Subaru WRX/STi TMIC” is in sale since Saturday, July 01, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Engines & Components\Other”. The seller is “fast-imports” and is located in Boulder, Colorado. This item can be shipped worldwide.
  • Brand: Crawford
  • Manufacturer Part Number: S0714-1

CP V2 Air/Oil Separator 2002-2007 WRX/STI with Front Mount Intercooler

Sunday, July 16th, 2017
CP V2 Air/Oil Separator 2002-2007 WRX/STI with Front Mount Intercooler

CP V2 Air/Oil Separator 2002-2007 WRX/STI with Front Mount Intercooler

Not a Catch Can – Closed Loop and Maintenance Free. Reduce Detonation and Risk of Engine Failure. Reduce Fuel Dilution and Subsequent Power Loss. Added Coolant Bypass Line to Avoid Condensation. Can is Heated for Cold Climates and Short Drives. The Crawford Performance Air/Oil Separator (AOS) is the original solution to Subaru’s notorious oiling system issues. Although the technology was pre-existing with other vehicle brands such as Porsche, Crawford Performance is the inventor of the first system specifically for Subaru. No other AOS on the market employs the same technology. How does it work? The built in AOS that comes factory in Subaru Engines is only semi-efficient at stock power levels. Any added power/stress/heat and G-Forces increases the amount of excess oil that ends up in your intake. Due to the fact the oil is heavier than water and you’re dealing with a horizontally-opposed engine, the oil can only end up in one place: coating the tops of your pistons. Since oil is naturally combustible, this causes irregularities with the controlled explosion that happens in this environment, subsequently creating multiple explosions. Another word for this is detonation an engine killer. Stop the oil from ever getting there with the Crawford Air/Oil Separator. Having a secondary system is your fail-safe for detonation that is un-related to a poor tune. You will also consume less oil and help maintain the ultimate mixture in your cylinders to maximaize your power output. This kit includes the can itself, and all necessary hoses and fittings to install. The install does take some mechanical knowledge, so we suggest taking your car in to a professional for installation. That being said, we provide step by step instructions so that enthusiasts can install the kit at home with a few simple tools. Fitment: Designed to fit with Front Mount Intercoolers. Unit is mounted on the pitch stop. The item “CP V2 Air/Oil Separator 2002-2007 WRX/STI with Front Mount Intercooler” is in sale since Wednesday, July 05, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Engines & Components\Other”. The seller is “crawfordperformance” and is located in Oceanside, California. This item can be shipped worldwide.
  • Brand: Crawford Performance
  • Manufacturer Part Number: S0714-1
  • Country/Region of Manufacture: United States

Perrin Air/Oil Separator for 02-07 WRX/STI With TMIC Black PSP-ENG-605BK

Saturday, July 15th, 2017
Perrin Air/Oil Separator for 02-07 WRX/STI With TMIC Black PSP-ENG-605BK

Perrin Air/Oil Separator for 02-07 WRX/STI With TMIC Black PSP-ENG-605BK

The PERRIN Performance Air Oil Separator traps oil from the crank case vents before it enters the intake, thus increasing intercooler efficiency and reduces chances of performance-robbing detonation. The AOS increases intercooler efficiency by reducing the amount of oil deposited into your intercooler and intake system! As blow-by/oil builds up inside your intercooler, the less efficient it becomes due to less heat being transferred away from your engine. This leads to power loss and detonation, which can be damaging to your engine. Reduce carbon build up in the combustion chamber, intake valves, and in your intake tract. Crank case blow-by is recirculated back to the intake to be ingested by the engine, but in doing so, gets stuck in the intake tract, intake valves, and the intercooler. This builds up over time which causes a loss in power and extra wear and tear on your valve train. The octane level of oil is very low. Anytime there is a significant amount of engine blow-by (oil) being put back into your engine, it reduces your fuel’s octane level leading to detonation or knock, which will cause loss of power and engine failure. We designed the PERRIN Air Oil Separator kit based on the idea that using a PCV on the AOS outlet ensures proper crank case venting during light loads and helps reduce unwanted blow-by gases into your intake system. Incorporating a PCV reduces the smell from exhaust and keeps your intake tract clean. Easy Disassembly For Cleaning. Over the years, a slight buildup may occur inside your AOS. This can be quickly taken care of by removing one bolt to access the inside for cleaning. This small feature is one of the many things that makes the PERRIN AOS stand out from the rest. The base plate of the the AOS is heated by coolant drawn from the engine. By keeping the AOS the same temperature as the engine and blow-by gases, water condensation is decreased allowing oil and water vapor to separate and pass through the can. This vital feature eliminates nearly all the sludge that can build up in the AOS body, which drastically reduce how often you must clean it. Powder coated for protection against the elements, the textured finish will look awesome for years to come. The PERRIN AOS is available in black or red texture powder coating. PERRIN PART NUMBER – PSP-ENG-605BK. All orders placed over the weekend will begin being processed on the following Monday. We do welcome international orders, but we do require that all international orders are processed through Pay-Pal. We will not violate any international laws and declare any items less than their actual value, as a gift, or for testing purposes, etc. The item “Perrin Air/Oil Separator for 02-07 WRX/STI With TMIC Black PSP-ENG-605BK” is in sale since Friday, June 30, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Engines & Components\Other”. The seller is “fast-imports” and is located in Boulder, Colorado. This item can be shipped worldwide.
  • Brand: PERRIN
  • Manufacturer Part Number: PSP-ENG-605BK

Perrin Air/Oil Separator for 08-14 WRX/STI With TMIC Black Brand New

Friday, July 14th, 2017
Perrin Air/Oil Separator for 08-14 WRX/STI With TMIC Black Brand New

AIR OIL SEPARATOR FOR WRX/STI 08-14 W/ FRONT MOUNT INTERCOOLER. The AOS increases intercooler efficiency by reducing the amount of oil deposited into your intercooler and intake system! As blow-by/oil builds up inside your intercooler, the less efficient it becomes due to less heat being transferred away from your engine. This leads to power loss and detonation, which can be damaging to your engine. Reduce carbon build up in the combustion chamber, intake valves, and in your intake tract. Crank case blow-by is recirculated back to the intake to be ingested by the engine, but in doing so, gets stuck in the intake tract, intake valves, and the intercooler. This builds up over time which causes a loss in power and extra wear and tear on your valves. The octane level of oil is very low. Anytime there is a significant amount of engine blow-by (oil) being put back into your engine, it reduces your fuel’s octane level leading to detonation or knock, which will cause loss of power and engine failure. We designed the PERRIN Air Oil Separator kit based on the idea that using a PCV on the AOS outlet ensures proper crank case venting during light loads and helps reduce unwanted blow-by gases into your intake system. Incorporating a PCV reduces the smell from exhaust and keeps your intake tract clean. Easy Disassembly For Cleaning. Over the years, a slight buildup may occur inside your AOS. This can be quickly taken care of by removing one bolt to access the inside for cleaning. This small feature is one of the many things that makes the PERRIN AOS stand out from the rest. THIS IS NOT A CATCH CAN. The PERRIN Air Oil Separator is not a catch can. Catch cans capture water and oil vapor filling with a sticky mess requiring it to be emptied. The PERRIN AOS separates engine oil from water vapor and allows it to drain back into the engine. Oil entering from the crankcase vents spins counter clockwise through the entire body of the AOS, passing along four walls equaling roughly 50.25 sq/in of surface area. The multiple baffle walls in our compact design simulate the surface area of an AOS that is 13.5 tall! As oil accumulates on all the walls, gravity pulls it to the bottom of the can where it drains back to the engine block while water vapor and air merge with the intake air and are re-burned in the engine. This means little maintenance or upkeep. All orders placed over the weekend will begin being processed on the following Monday. We do welcome international orders, but we do require that all international orders are processed through Pay-Pal. We will not violate any international laws and declare any items less than their actual value, as a gift, or for testing purposes, etc. The item “Perrin Air/Oil Separator for 08-14 WRX/STI With TMIC Black Brand New” is in sale since Thursday, June 29, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Engines & Components\Other”. The seller is “fast-imports” and is located in Boulder, Colorado. This item can be shipped worldwide.
  • Brand: Perrin
  • Manufacturer Part Number: PSP-ENG-607BK

Perrin Air/Oil Separator for 02-14 WRX/STI With TMIC Red Brand New

Friday, June 30th, 2017
Perrin Air/Oil Separator for 02-14 WRX/STI With TMIC Red Brand New

AIR OIL SEPARATOR FOR WRX/STI 08-14 W/ FRONT MOUNT INTERCOOLER. The AOS increases intercooler efficiency by reducing the amount of oil deposited into your intercooler and intake system! As blow-by/oil builds up inside your intercooler, the less efficient it becomes due to less heat being transferred away from your engine. This leads to power loss and detonation, which can be damaging to your engine. Reduce carbon build up in the combustion chamber, intake valves, and in your intake tract. Crank case blow-by is recirculated back to the intake to be ingested by the engine, but in doing so, gets stuck in the intake tract, intake valves, and the intercooler. This builds up over time which causes a loss in power and extra wear and tear on your valves. Reduce Detonation The octane level of oil is very low. Anytime there is a significant amount of engine blow-by (oil) being put back into your engine, it reduces your fuel’s octane level leading to detonation or knock, which will cause loss of power and engine failure. PCV System Included We designed the PERRIN Air Oil Separator kit based on the idea that using a PCV on the AOS outlet ensures proper crank case venting during light loads and helps reduce unwanted blow-by gases into your intake system. Incorporating a PCV reduces the smell from exhaust and keeps your intake tract clean. Easy Disassembly For Cleaning Over the years, a slight buildup may occur inside your AOS. This can be quickly taken care of by removing one bolt to access the inside for cleaning. This small feature is one of the many things that makes the PERRIN AOS stand out from the rest. THIS IS NOT A CATCH CAN. The PERRIN Air Oil Separator is not a catch can. Catch cans capture water and oil vapor filling with a sticky mess requiring it to be emptied. The PERRIN AOS separates engine oil from water vapor and allows it to drain back into the engine. Oil entering from the crankcase vents spins counter clockwise through the entire body of the AOS, passing along four walls equaling roughly 50.25 sq/in of surface area. The multiple baffle walls in our compact design simulate the surface area of an AOS that is 13.5 tall! As oil accumulates on all the walls, gravity pulls it to the bottom of the can where it drains back to the engine block while water vapor and air merge with the intake air and are re-burned in the engine. This means little maintenance or upkeep. All orders placed over the weekend will begin being processed on the following Monday. We do welcome international orders, but we do require that all international orders are processed through Pay-Pal. We will not violate any international laws and declare any items less than their actual value, as a gift, or for testing purposes, etc. The item “Perrin Air/Oil Separator for 02-14 WRX/STI With TMIC Red Brand New” is in sale since Thursday, June 29, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Engines & Components\Other”. The seller is “fast-imports” and is located in Boulder, Colorado. This item can be shipped worldwide.
  • Brand: Perrin
  • Manufacturer Part Number: PSP-ENG-607RD

Perrin Air/Oil Separator for 08-14 WRX/STI With TMIC- Black Brand New

Thursday, June 29th, 2017
Perrin Air/Oil Separator for 08-14 WRX/STI With TMIC- Black Brand New

AIR OIL SEPARATOR FOR WRX/STI 08-14 W/ TOP MOUNTED INTERCOOLER. The AOS increases intercooler efficiency by reducing the amount of oil deposited into your intercooler and intake system! As blow-by/oil builds up inside your intercooler, the less efficient it becomes due to less heat being transferred away from your engine. This leads to power loss and detonation, which can be damaging to your engine. Reduce carbon build up in the combustion chamber, intake valves, and in your intake tract. Crank case blow-by is recirculated back to the intake to be ingested by the engine, but in doing so, gets stuck in the intake tract, intake valves, and the intercooler. This builds up over time which causes a loss in power and extra wear and tear on your valves. Reduce Detonation The octane level of oil is very low. Anytime there is a significant amount of engine blow-by (oil) being put back into your engine, it reduces your fuel’s octane level leading to detonation or knock, which will cause loss of power and engine failure. PCV System Included We designed the PERRIN Air Oil Separator kit based on the idea that using a PCV on the AOS outlet ensures proper crank case venting during light loads and helps reduce unwanted blow-by gases into your intake system. Incorporating a PCV reduces the smell from exhaust and keeps your intake tract clean. Easy Disassembly For Cleaning Over the years, a slight buildup may occur inside your AOS. This can be quickly taken care of by removing one bolt to access the inside for cleaning. This small feature is one of the many things that makes the PERRIN AOS stand out from the rest. THIS IS NOT A CATCH CAN. The PERRIN Air Oil Separator is not a catch can. Catch cans capture water and oil vapor filling with a sticky mess requiring it to be emptied. The PERRIN AOS separates engine oil from water vapor and allows it to drain back into the engine. Oil entering from the crankcase vents spins counter clockwise through the entire body of the AOS, passing along four walls equaling roughly 50.25 sq/in of surface area. The multiple baffle walls in our compact design simulate the surface area of an AOS that is 13.5 tall! As oil accumulates on all the walls, gravity pulls it to the bottom of the can where it drains back to the engine block while water vapor and air merge with the intake air and are re-burned in the engine. This means little maintenance or upkeep. All orders placed over the weekend will begin being processed on the following Monday. We do welcome international orders, but we do require that all international orders are processed through Pay-Pal. We will not violate any international laws and declare any items less than their actual value, as a gift, or for testing purposes, etc. The item “Perrin Air/Oil Separator for 08-14 WRX/STI With TMIC- Black Brand New” is in sale since Thursday, June 29, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Engines & Components\Other”. The seller is “fast-imports” and is located in Boulder, Colorado. This item can be shipped worldwide.
  • Brand: Perrin
  • Manufacturer Part Number: PSP-ENG-606BK

Perrin Air/Oil Separator for 08-14 WRX/STI With TMIC- Red Brand New

Saturday, June 24th, 2017
Perrin Air/Oil Separator for 08-14 WRX/STI With TMIC- Red Brand New

AIR OIL SEPARATOR FOR 08-14 WRX/STI W/ TOP MOUNT INTERCOOLER. The AOS increases intercooler efficiency by reducing the amount of oil deposited into your intercooler and intake system! As blow-by/oil builds up inside your intercooler, the less efficient it becomes due to less heat being transferred away from your engine. This leads to power loss and detonation, which can be damaging to your engine. Reduce carbon build up in the combustion chamber, intake valves, and in your intake tract. Crank case blow-by is recirculated back to the intake to be ingested by the engine, but in doing so, gets stuck in the intake tract, intake valves, and the intercooler. This builds up over time which causes a loss in power and extra wear and tear on your valves. Reduce Detonation The octane level of oil is very low. Anytime there is a significant amount of engine blow-by (oil) being put back into your engine, it reduces your fuel’s octane level leading to detonation or knock, which will cause loss of power and engine failure. PCV System Included We designed the PERRIN Air Oil Separator kit based on the idea that using a PCV on the AOS outlet ensures proper crank case venting during light loads and helps reduce unwanted blow-by gases into your intake system. Incorporating a PCV reduces the smell from exhaust and keeps your intake tract clean. Easy Disassembly For Cleaning Over the years, a slight buildup may occur inside your AOS. This can be quickly taken care of by removing one bolt to access the inside for cleaning. This small feature is one of the many things that makes the PERRIN AOS stand out from the rest. THIS IS NOT A CATCH CAN The PERRIN. Air Oil Separator is not a catch can. Catch cans capture water and oil vapor filling with a sticky mess requiring it to be emptied. The PERRIN AOS separates engine oil from water vapor and allows it to drain back into the engine. Oil entering from the crankcase vents spins counter clockwise through the entire body of the AOS, passing along four walls equaling roughly 50.25 sq/in of surface area. The multiple baffle walls in our compact design simulate the surface area of an AOS that is 13.5 tall! As oil accumulates on all the walls, gravity pulls it to the bottom of the can where it drains back to the engine block while water vapor and air merge with the intake air and are re-burned in the engine. This means little maintenance or upkeep. All orders placed over the weekend will begin being processed on the following Monday. We do welcome international orders, but we do require that all international orders are processed through Pay-Pal. We will not violate any international laws and declare any items less than their actual value, as a gift, or for testing purposes, etc. The item “Perrin Air/Oil Separator for 08-14 WRX/STI With TMIC- Red Brand New” is in sale since Saturday, June 24, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Engines & Components\Other”. The seller is “fast-imports” and is located in Boulder, Colorado. This item can be shipped worldwide.
  • Brand: Perrin
  • Manufacturer Part Number: PSP-ENG-606RD

Crawford Air Oil Separator 02-07 Subaru WRX/STi TMIC

Thursday, June 15th, 2017
Crawford Air Oil Separator 02-07 Subaru WRX/STi TMIC

Crawford Air Oil Separator 02-07 Subaru WRX/STi TMIC

This listing is for the newer, black version! Drawing on their 35 years of racing knowledge, the Crawford Performance Closed Loop Air/Oil Separator was engineered and designed to keep motor oil where it belongs inside the motor and out of the intake system. In the stock configuration, the crankcase is vented to the intake system in three different places. Each of these vents have a baffle system built within the motor to minimize the transfer of oil to the intake, but some oil can still make its way into the combustion chambers. When the oil enters the combustion chambers, it effectively lowers the octane of the fuel, leading to detonation. Crawford’s Air/Oil Separator effectively removes the oil from the air coming out of the engines ventilation system via a two stage process. The first step in the process is a large volumetric swirl pot. The function of the swirl pot is to use centrifugal force to remove the oil from the air. The air is then passed through a second chamber (see second step below), and extracted through the top of the AOS. Gravity then sends the remaining oil down the walls of the swirl pot and collects in the bottom of the AOS. The second step involves a second chamber located within the first chamber. As the separated air moves up inside the AOS, it must enter the second chamber before it can vent out the top of the AOS. The function of the secondary chamber is to remove any residual oil that may have made its way up the swirl pot. The secondary chamber also has a drain to return any separated oil back to the engine. Crawford’s Version 2 AOS also incorporates an internal heater to keep the AOS operating at the proper temperature. The coolant line that runs from the turbo to the engine is now re-routed through the AOS. The effectively equalizes the temperature between the AOS and the engine to avoid condensation which can occur within any AOS. This heater also makes sure the vaporized water leaving the motor makes its way through the AOS in vapor form, rather than condensing back into a liquid. This is a MUST in cold weather and a bonus for any climate. NO OTHER AOS ON THE MARKET EMPLOYS THIS TECHNOLOGY! Crawford Part Number — S0714-1. All orders placed over the weekend will begin being processed on the following Monday. We do welcome international orders, but we do require that all international orders are processed through Pay-Pal. We cannot guarantee any of our parts will fit non-US cars unless explicitly stated. We will not violate any international laws and declare any items less than their actual value, as a gift, or for testing purposes, etc. The item “Crawford Air Oil Separator 02-07 Subaru WRX/STi TMIC” is in sale since Thursday, June 01, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Engines & Components\Other”. The seller is “fast-imports” and is located in Boulder, Colorado. This item can be shipped worldwide.
  • Brand: Crawford
  • Manufacturer Part Number: S0714-1

Perrin Air/Oil Separator for 08-14 WRX/STI With TMIC Black Brand New

Tuesday, June 6th, 2017
Perrin Air/Oil Separator for 08-14 WRX/STI With TMIC Black Brand New

AIR OIL SEPARATOR FOR WRX/STI 08-14 W/ FRONT MOUNT INTERCOOLER. The AOS increases intercooler efficiency by reducing the amount of oil deposited into your intercooler and intake system! As blow-by/oil builds up inside your intercooler, the less efficient it becomes due to less heat being transferred away from your engine. This leads to power loss and detonation, which can be damaging to your engine. Reduce carbon build up in the combustion chamber, intake valves, and in your intake tract. Crank case blow-by is recirculated back to the intake to be ingested by the engine, but in doing so, gets stuck in the intake tract, intake valves, and the intercooler. This builds up over time which causes a loss in power and extra wear and tear on your valves. The octane level of oil is very low. Anytime there is a significant amount of engine blow-by (oil) being put back into your engine, it reduces your fuel’s octane level leading to detonation or knock, which will cause loss of power and engine failure. We designed the PERRIN Air Oil Separator kit based on the idea that using a PCV on the AOS outlet ensures proper crank case venting during light loads and helps reduce unwanted blow-by gases into your intake system. Incorporating a PCV reduces the smell from exhaust and keeps your intake tract clean. Easy Disassembly For Cleaning. Over the years, a slight buildup may occur inside your AOS. This can be quickly taken care of by removing one bolt to access the inside for cleaning. This small feature is one of the many things that makes the PERRIN AOS stand out from the rest. THIS IS NOT A CATCH CAN. The PERRIN Air Oil Separator is not a catch can. Catch cans capture water and oil vapor filling with a sticky mess requiring it to be emptied. The PERRIN AOS separates engine oil from water vapor and allows it to drain back into the engine. Oil entering from the crankcase vents spins counter clockwise through the entire body of the AOS, passing along four walls equaling roughly 50.25 sq/in of surface area. The multiple baffle walls in our compact design simulate the surface area of an AOS that is 13.5 tall! As oil accumulates on all the walls, gravity pulls it to the bottom of the can where it drains back to the engine block while water vapor and air merge with the intake air and are re-burned in the engine. This means little maintenance or upkeep. All orders placed over the weekend will begin being processed on the following Monday. We do welcome international orders, but we do require that all international orders are processed through Pay-Pal. We will not violate any international laws and declare any items less than their actual value, as a gift, or for testing purposes, etc. The item “Perrin Air/Oil Separator for 08-14 WRX/STI With TMIC Black Brand New” is in sale since Tuesday, May 30, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Engines & Components\Other”. The seller is “fast-imports” and is located in Boulder, Colorado. This item can be shipped worldwide.
  • Brand: Perrin
  • Manufacturer Part Number: PSP-ENG-607BK